Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Chrysler 5003461AA VALVECORE-A/C Line

2002-2013 Chrysler 5003461AA

Customer Questions & Expert Answers (14)
5003461AA Mopar VALVECORE-A/C Line Product Photo 1 of 4
5003461AA Mopar VALVECORE-A/C Line Product Photo 1 of 4
5003461AA Mopar VALVECORE-A/C Line Product Photo 2 of 4
5003461AA Mopar VALVECORE-A/C Line Product Photo 3 of 4
5003461AA Mopar VALVECORE-A/C Line Product Photo 4 of 4
5003461AA Mopar VALVECORE-A/C Line Illustration 1 of 1
  • Part Description
    Valve Core A/C Line
  • Replaces
    5011346AA
  • Manufacturer
    Mopar
Make sure this part fits
$22.14 MSRP: $31.95
You Save: $9.81 (31%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • 5003461AA VALVECORE-A/C Line is Ref No. 22 in the diagram below

    2009 Chrysler Aspen VALVECORE-A/C Line Diagram for 5003461AA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5003461AA
    Part DescriptionValve Core A/C Line
    Item Dimensions0.3 x 3.7 x 4.1 inches
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces5011346AA
    ManufacturerMopar
    SKU5003461AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2013 Chrysler 3006 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.4LBase AWD, Base RWD, C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, C SRT8 RWD, Limited AWD, Limited RWD, LX RWD, S AWD, S RWD, S V6 AWD, S V6 RWD, S V8 AWD, S V8 RWD, SRT Core RWD, SRT Premium RWD, Touring AWD, Touring Plus RWD, Touring RWD
    2009 Chrysler Aspen8 Cyl 5.7LLimited 2WD, Limited 4WD, Limited HEV 4WD
    2004-2006 Chrysler Pacifica6 Cyl 3.5L, 6 Cyl 3.8LBase AWD, Base FWD, Limited AWD, Limited FWD, Touring AWD, Touring FWD
    2002-2010 Chrysler PT Cruiser4 Cyl 2.4LBase, Base Convertible, Classic, GT, GT Convertible, Limited, LX, Touring, Touring Convertible
    2004-2007 Chrysler Town & Country
    2002-2003 Chrysler Voyager4 Cyl 2.4LBase, EC, LX

  • Customer Questions & Expert Answers

    Q:
    Please cross check for fit. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5003461AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    What Steps Should You Follow to Replace an HVAC Pressure Switch on Chrysler 300? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal. Unplug the electrical connector from the air conditioning pressure switch. Unscrew the pressure switch from the line, being careful not to damage the refrigerant line. Discard the O-ring seal. Lubricate a new R-134a compatible O-ring seal with the appropriate refrigerant oil and place it into position. Screw the new switch onto the refrigerant line valve until hand tight, and then tighten it securely. Reconnect the electrical connector and the battery cable.
    Posted by MoparPartsGiant Specialist
    Q:
    How to replace an HVAC Pressure Switch in an air conditioning system on Chrysler PT Cruiser? Posted by Customer
    A:
    An air conditioning technician should discharge the refrigerant. Then, they should unplug an electrical connector from a pressure cycling switch. A backup wrench should be used to unscrew the pressure cycling switch without deforming the pressure line. The O-ring of the switch has to be lubricated with clean refrigerant oil of the proper kind. The new one has to be screwed into the threads and tightened well enough. After that, you are supposed to reconnect an electric connector. Finally, it is the duty of the shop which discharged it to evacuate, charge and leak-test your system again.
    Posted by MoparPartsGiant Specialist
    Q:
    What Steps Should You Follow to Replace an HVAC Pressure Switch on Dodge Charger? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal. Unplug the electrical connector from the air conditioning pressure switch. Unscrew the pressure switch from the line, being careful not to damage the refrigerant line. Discard the O-ring seal. Lubricate a new R-134a compatible O-ring seal with the appropriate refrigerant oil and place it into position. Screw the new switch onto the refrigerant line valve until hand tight, and then tighten it securely. Reconnect the electrical connector and the battery cable.
    Posted by MoparPartsGiant Specialist
    Q:
    Do You Need to Discharge the Air Conditioning System to Replace the HVAC Pressure Switch on Dodge Durango? Posted by Customer
    A:
    To do the job right, you need to take off the cable that goes to the negative terminal of your Durango's battery. Open the air conditioning pressure switch by disconnecting its electrical power cable that connects to the high pressure line above the condenser. Loosen the pressure cycling switch with a backup wrench so you don't damage the pipe's refrigerant pipe. Use fresh refrigerant oil - the kind needed for your vehicle - to oil the switch's rubber seal before installing it. After placing the new switch at hand tight, completely lock it in place by turning the wrench twice. Last, reconnect both the electrical wires and the battery cable.
    Posted by MoparPartsGiant Specialist
    Q:
    Do You Need to Discharge the Air Conditioning System to Replace the HVAC Pressure Switch on Dodge Dakota? Posted by Customer
    A:
    You should disconnect the battery cable from its negative terminal before changing the high pressure switch of a Dakota. To begin the air conditioning pressure switch replacement process you must disengage the electrical connector that is positioned on the high pressure line near the coolant reservoir. The pressure cycling switch needs an unscrewing with a back-up wrench while the refrigerant line remains intact. Clean refrigerant oil of correct type should be used for lubrication of the switch O-ring. Apply the new switch to the refrigerant line by screwing it until it reaches hand-tightness then tighten it permanently with the back-up wrench. The electrical connector and battery cable should be connected at the end of the procedure.
    Posted by MoparPartsGiant Specialist
    Q:
    What Steps Should You Follow to Replace an HVAC Pressure Switch on Dodge Magnum? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal. Unplug the electrical connector from the air conditioning pressure switch. Unscrew the pressure switch from the line, being careful not to damage the refrigerant line. Discard the O-ring seal. Lubricate a new R-134a compatible O-ring seal with the appropriate refrigerant oil and place it into position. Screw the new switch onto the refrigerant line valve until hand tight, and then tighten it securely. Reconnect the electrical connector and the battery cable.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the Location of the HVAC Pressure Switch and How Can It Be Replaced on Dodge Ram 1500? Posted by Customer
    A:
    The air conditioning pressure switch is located on the high pressure line. To replace the switch, begin by disconnecting the cable(s) from the negative battery terminal(s). Then, unplug the electrical connector from the pressure switch and unscrew the old switch. Installation is the reverse of removal, making sure to lubricate the 0-ring with clean refrigerant oil before installing the new switch.
    Posted by MoparPartsGiant Specialist
    Q:
    What steps should be taken to replace the HVAC Pressure Switch for the 2011 Dodge Challenger? Posted by Customer
    A:
    Disconnect the cable from the negative battery terminal. Unplug the electrical connector from the air conditioning pressure switch and unscrew the switch. Unscrew the pressure switch from the line, being careful not to damage the refrigerant line, and discard the O-ring seal. Lubricate a new R-134a or R-1234yf compatible O-ring seal with the appropriate refrigerant oil and place it into position. Screw the new switch onto the refrigerant line valve until hand-tight, and then tighten it securely. Reconnect the electrical connector and the battery cable.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you replace the HVAC Pressure Switch for the 2009 Dodge Ram 2500? Posted by Customer
    A:
    To replace the switch, start by disconnecting the cable(s) from the negative battery terminal(s). Then, unplug the electrical connector from the pressure switch and unscrew the old switch. Before installing the new switch, lubricate the 0-ring with clean refrigerant oil. Screw the new switch onto the refrigerant line until hand tight, then tighten it securely. Finally, reconnect the electrical connector and the negative battery cable(s).
    Posted by MoparPartsGiant Specialist
    Q:
    How do you replace the HVAC Pressure Switch for the 2009 Dodge Ram 3500? Posted by Customer
    A:
    To replace the switch, start by disconnecting the cable(s) from the negative battery terminal(s). Then, unplug the electrical connector from the pressure switch and unscrew the old switch. Before installing the new switch, lubricate the 0-ring with clean refrigerant oil. Screw the new switch onto the refrigerant line until hand tight, then tighten it securely. Finally, reconnect the electrical connector and the negative battery cable(s).
    Posted by MoparPartsGiant Specialist
    Q:
    How do you replace the HVAC Pressure Switch for the 2012 Ram 1500? Posted by Customer
    A:
    To replace the switch, start by disconnecting the cable(s) from the negative battery terminal(s). Then, unplug the electrical connector from the pressure switch and unscrew the old switch. Before installing the new switch, lubricate the 0-ring with clean refrigerant oil. Screw the new switch onto the refrigerant line until hand tight, then tighten it securely. Finally, reconnect the electrical connector and the negative battery cable(s).
    Posted by MoparPartsGiant Specialist
    Q:
    Where is the HVAC Pressure Switch located for the air conditioning in the 2012 Ram 2500? Posted by Customer
    A:
    The air conditioning pressure switch is located on the high pressure line.
    Posted by MoparPartsGiant Specialist
    Q:
    Where is the HVAC Pressure Switch located for the 2012 Ram 3500? Posted by Customer
    A:
    The air conditioning pressure switch is located on the high pressure line.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 5003461AA, the Right Choice

To ensure reliability, purchase Mopar part # 5003461AA VALVECORE-A/C Line. It is sometimes referred to as HVAC Pressure Switch, A/C System Valve Core. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler 300, PT Cruiser, and Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 5003461AA VALVECORE-A/C Line. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly