My Garage
My Account
Cart
Genuine Dodge Magnum HVAC Pressure Switch
Air Pressure Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 HVAC Pressure Switches found
Dodge Magnum Valve-A/C Pressure TRANSDUCER
Part Number: 5174039AA$115.88 MSRP: $172.00You Save: $56.12 (33%)
Dodge Magnum T/DUCEPKG-A/C Pressure
Part Number: 5019881AA$117.40 MSRP: $246.00You Save: $128.60 (53%)
Dodge Magnum Valve-A/C Pressure TRANSDUCER
Part Number: 5174039AB$116.18 MSRP: $172.00You Save: $55.82 (33%)
Dodge Magnum HVAC Pressure Switch
The Dodge Magnum HVAC Pressure Switch monitors the refrigerant pressure flowing through the vehicle's air conditioning (A/C) system. The switch monitors the pressure and informs the components in the A/C chain when to engage or disengage. It also protects the components in the A/C chain from pressure extremes. This automobile Dodge HVAC Pressure Switch is just like the small fan or blower relays, a delicate but important link so Dodge drivers should replace it before its weakness causes larger failures. In the event of a switch malfunction, the pressure control module receives erroneous information just like ambient sensor breakdown. This leads to weak cooling, wrongly activated heating, or permanent dash fault codes. The early Magnum choice of HVAC Pressure Switch was a single-stage that opened on low force only. Mid-generation Magnum usage of a dual-stage HVAC Pressure Switch that sensed both low and high limits was to broaden protection without adding extra electronics. The recent update to the Magnum retained the dual range HVAC Pressure Switch but with internal contacts that operate faster. The latter creates quicker shutdown of the compressor, fan relay, and blower motor. Prompt renewal of a tired HVAC Pressure Switch quickly restores stable climate performance for every user within Dodge systems.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Magnum HVAC Pressure Switch at great affordable prices. Moreover, all genuine Dodge Magnum HVAC Pressure Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Magnum HVAC Pressure Switch Parts Questions & Experts Answers
- Q: How to Replace an Air Conditioning Pressure Switch on Dodge Magnum?A:Disconnect the cable from the negative battery terminal. Unplug the electrical connector from the air conditioning pressure switch. Unscrew the pressure switch from the line, being careful not to damage the refrigerant line. Discard the O-ring seal. Lubricate a new R-134a compatible O-ring seal with the appropriate refrigerant oil and place it into position. Screw the new switch onto the refrigerant line valve until hand tight, and then tighten it securely. Reconnect the electrical connector and the battery cable.
