Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Jeep J3237196 Vibration Damper

1984-1990 Jeep J3237196

Customer Questions & Expert Answers (6)
J3237196 Mopar Vibration Damper Product Photo 1 of 2
J3237196 Mopar Vibration Damper Product Photo 1 of 2
J3237196 Mopar Vibration Damper Product Photo 2 of 2
J3237196 Mopar Vibration Damper Illustration 1 of 1
  • Part Description
    DAMPER, w/V-Belt Drive
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • J3237196 Vibration Damper is Ref No. 8 in the diagram below

    1984 Jeep J10 Vibration Damper Diagram for J3237196
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part NumberJ3237196
    Part DescriptionDAMPER, w/V-Belt Drive
    Other NamesDamper, Vibration Damper
    Item Dimensions6.8 x 7.1 x 1.8 inches
    Item Weight7.10 Pounds
    ConditionNew
    ManufacturerMopar
    SKUJ3237196
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1987-1990 Jeep Cherokee6 Cyl 4.2L
    1987-1990 Jeep Comanche
    1984-1986 Jeep Grand Wagoneer6 Cyl 4.2L
    1984-1988 Jeep J106 Cyl 4.2L
    1984-1988 Jeep J206 Cyl 4.2L
    1987-1990 Jeep Wagoneer6 Cyl 4.2L
    1984-1990 Jeep Wrangler6 Cyl 4.2L

  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if J3237196 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    How to remove the Harmonic Balancer in a four-cylinder engine on Jeep Comanche? Posted by Customer
    A:
    Disconnect the negative battery terminal and remove drivebelts. Unscrew the fan shroud if present. Raise the vehicle and secure it on jackstands. For manual transmission, apply parking brake and put in gear. Remove crankshaft pulley bolts. For automatic transmission, remove starter motor and immobilize starter ring gear while loosening pulley bolts. Loosen harmonic balancer retaining bolt, remove it and the balancer. If needed, use a wheel puller. Apply moly-base grease to balancer seal contact surface. Align balancer with crankshaft and tap into position. Tighten balancer-to-crankshaft bolt to specified torque. Install crankshaft pulley and tighten bolts with Loctite. Finally, reinstall drivebelts and fan shroud.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove and install the drivebelts, crankshaft pulley, and Harmonic Balancer in V6 engine on Jeep Wagoneer? Posted by Customer
    A:
    Start by removing the bolts and separating the radiator shroud from the radiator. Remove the cooling fan and shroud. Loosen the drivebelt adjusting bolts and remove the drivebelts, tagging each for reinstallation. Remove the crankshaft pulley bolts and the pulley, locking the starter ring gear to prevent rotation. Coat the front cover sealing surface with moly-base grease before installing the harmonic balancer. Align the harmonic balancer over the key on the crankshaft and use a tool to install it. Remove the tool, install the harmonic balancer bolt, and tighten it. Installation is the reverse of removal.
    Posted by MoparPartsGiant Specialist
    Q:
    How can the Harmonic Balancer be removed from the crankshaft for the 1987 Jeep Cherokee? Posted by Customer
    A:
    Use a vibration damper removal tool to pull the damper off the crankshaft.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the Harmonic Balancer for the 1990 Jeep Wrangler be positioned for the procedure? Posted by Customer
    A:
    Raise the vehicle and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you prevent the crankshaft from rotating while removing the Harmonic Balancer for the 1987 Jeep Wrangler? Posted by Customer
    A:
    Remove the vibration damper retaining bolt and washer, then place two 5/16 x 1-1/2-inch long bolts into the damper holes and hold a pry bar between them. Rotate the crankshaft until the bar contacts the frame.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part J3237196, the Right Choice

To ensure reliability, purchase Mopar part # J3237196 Vibration Damper. It is sometimes referred to as Harmonic Balancer. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Jeep Cherokee, Comanche, and Wrangler models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as J3237196 Vibration Damper. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly