Your vehicle deserves only genuine OEM Mopar parts and accessories. To ensure reliability, purchase Mopar part # 68141376AB TRANSDUCE-A/C Pressure TRANSDUCER. It is sometimes referred to as Jeep HVAC Pressure Switch. Our Mopar parts and accessories are expedited directly from authorized Mopar dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Mopar parts are the best for restoring your vehicle to factory condition performance. This part fits specific Jeep Cherokee, Grand Cherokee, Wrangler models.
Affordable, reliable and built to last, Mopar part # 68141376AB TRANSDUCE-A/C Pressure TRANSDUCER stands out as the smart option. MoparPartsGiant.com is your prime online source with the biggest and best selection of genuine Mopar parts and accessories at giant discounted prices. We have the OEM Mopar parts and accessories you need at the wholesale prices. MoparPartsGiant.com has you covered no matter what type of Mopar vehicle you drive. For detailed Jeep parts information, click here.
Make sure this part fits your vehicle
Jeep 68141376AB TRANSDUCE-A/C Pressure TRANSDUCER
2012-2018 Jeep 68141376AB
- Part DescriptionValve A/C pressure Transducer
- Replaced By68308727AA
- ManufacturerMopar
$47.67 MSRP: $70.20 1
You Save: $22.53 (33%)
68141376AB TRANSDUCE-A/C Pressure TRANSDUCER is Ref No. 13 in the diagram below
Product Specifications
Brand Genuine Jeep Manufacturer Part Number 68141376AB Part Description Valve A/C pressure Transducer Item Dimensions 2.2 x 1.3 x 1.5 inches Item Weight 3.30 Pounds Condition New Fitment Type Direct Replacement Manufacturer Mopar SKU 68141376AB Warranty This genuine Mopar part is guaranteed by Mopar's factory warranty. Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65Vehicle Fitment
Year Make Model Engine Important vehicle option details 2014-2018 Jeep Cherokee 4 Cyl 2.4L, 6 Cyl 3.2L Latitude AWD, Latitude FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Sport AWD, Sport FWD, Trailhawk AWD 2013-2018 Jeep Compass 4 Cyl 2.0L, 4 Cyl 2.4L Latitude 4WD, Latitude AWD, Latitude FWD, Limited 4WD, Limited AWD, Limited FWD, Sport 4WD, Sport AWD, Sport FWD, Trailhawk AWD 2012-2018 Jeep Grand Cherokee 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Limited AWD, Limited RWD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD 2013-2017 Jeep Patriot 4 Cyl 2.0L, 4 Cyl 2.4L Latitude 4WD, Latitude FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD 2015 Jeep Renegade 4 Cyl 2.4L Latitude AWD, Latitude FWD, Limited AWD, Limited FWD, Sport AWD, Sport FWD, Trailhawk AWD 2013-2018 Jeep Wrangler 6 Cyl 3.6L Rubicon, Rubicon 4WD, Sahara, Sahara 4WD, Sport, Sport 4WD, Unlimited Rubicon, Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD
Customer Questions & Answers
- Q:Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
- A:You can Select Your Vehicle to check if 68141376AB fits your vehicle.Posted by MoparPartsGiant Specialist
- Q:What steps should be taken to replace the pressure switch for the 2012 Dodge Challenger? Posted by Customer
- A:1. Disconnect the cable from the negative battery terminal. 2. Unplug the electrical connector from the air conditioning pressure switch and unscrew the switch. 3. Unscrew the pressure switch from the line, being careful not to damage the refrigerant line, and discard the O-ring seal. 4. Lubricate a new R-134a or R-1234yf compatible O-ring seal with the appropriate refrigerant oil and place it into position. 5. Screw the new switch onto the refrigerant line valve until hand-tight, and then tighten it securely. 6. Reconnect the electrical connector and the battery cable.Posted by MoparPartsGiant Specialist
- See expert answers on similar HVAC Pressure Switch
- Q:How do you replace the switch for the 2018 Ram 1500? Posted by Customer
- A:To replace the switch, start by disconnecting the cable(s) from the negative battery terminal(s). Then, unplug the electrical connector from the pressure switch and unscrew the old switch. Before installing the new switch, lubricate the 0-ring with clean refrigerant oil. Screw the new switch onto the refrigerant line until hand tight, then tighten it securely. Finally, reconnect the electrical connector and the negative battery cable(s).Posted by MoparPartsGiant Specialist
- See expert answers on similar HVAC Pressure Switch
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
Genuine Mopar Part 68141376AB, the Right Choice
Why choose Mopar Parts Giant
- Dedicated Service
Your complete satisfaction is our #1 goal
- Lowest Prices
Best deals on genuine OE parts from dealerships
- Fast Delivery
Orders are processed and delivered promptly