Make sure this part fits your vehicle

Mopar 4593462AA Brake Hub And Bearing

2000-2002 Mopar 4593462AA

Mopar 4593462AA Brake Hub And Bearing
  • Part Description
    Bearing-Brake
  • Replaced By
    4578144AB
  • Manufacturer
    Mopar
Customer Questions & Answers
$217.92 MSRP: $318.00
You Save: $100.08 (32%)
1
ADD TO CART
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4593462AA
    Part DescriptionBearing-Brake
    Item Dimensions7.2 x 7.8 x 6.3 inches
    Item Weight7.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4593462AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2000 Chrysler Cirrus4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5LLX, LXi
    2000-2002 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.5L, 6 Cyl 2.7LGTC Convertible, JX, JXi, Limited Convertible, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan
    2000-2002 Dodge Stratus4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L, 6 Cyl 2.7LES, R/T, SE, SE Plus

Customer Questions & Answers

Q:
This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
A:
You can Select Your Vehicle to check if 4593462AA fits your vehicle.
Posted by MoparPartsGiant Specialist
Q:
How do you install the hub/bearing assembly for the 1998 Chrysler Cirrus? Posted by Customer
A:
Use a new retaining nut and tighten it to the specified torque.
Posted by MoparPartsGiant Specialist
See expert answers on similar Wheel Hub
Q:
How to Remove and Install the front wheel hub? Posted by Customer
A:
To remove the cotter pin, nut lock, and spring washer from the front stub axle, loosen the drive axle/hub nut. Then, loosen the wheel lug nuts, raise the vehicle and support it securely on jack stands, and remove the wheel. Remove the brake caliper, support it with a piece of wire, and remove the brake disc from the hub. Remove the balljoint heat shield from the lower control arm on vehicles equipped with 15-inch wheels. Separate the tie-rod end from the steering knuckle arm. Remove the speed sensor cable routing bracket from the steering knuckle on vehicles equipped with anti-lock brakes. Separate the steering knuckle from the lower control arm balljoint. Support the driveshaft and pull the steering knuckle away from the outer CN joint. Remove the cotter pin and the nut from the upper balljoint stud. Separate the upper balljoint stud from the steering knuckle using a puller. Mount the steering knuckle securely in a vise. Remove the hub/bearing mounting bolts from the steering knuckle. Remove the hub/bearing from the steering knuckle. It may be necessary to tap the assembly out with a hammer. To install, clean all hub/bearing mounting surfaces on the steering knuckle. Install the hub/bearing on the steering knuckle and tighten the bolts to the torque. Install the remaining components in reverse order of removal, making sure to install the tie-rod and balljoint heat shields. Tighten all nuts/bolts to the torque. Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the torque. Finally, have an assistant apply the brakes and tighten the driveaxle/hub nut to the torque.
Posted by MoparPartsGiant Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Mopar Part 4593462AA, the Right Choice

Your vehicle deserves only genuine OEM Mopar parts and accessories. To ensure reliability, purchase Mopar part # 4593462AA Brake Hub And Bearing. It is sometimes referred to as Mopar Wheel Bearing, Mopar Wheel Hub. Our Mopar parts and accessories are expedited directly from authorized Mopar dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Mopar parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chrysler Cirrus, Sebring models. It fits Dodge Stratus.

Affordable, reliable and built to last, Mopar part # 4593462AA Brake Hub And Bearing stands out as the smart option. MoparPartsGiant.com is your prime online source with the biggest and best selection of genuine Mopar parts and accessories at giant discounted prices. We have the OEM Mopar parts and accessories you need at the wholesale prices. MoparPartsGiant.com has you covered no matter what type of Mopar vehicle you drive. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly