Make sure this part fits

Mopar 4781643AA Engine Crankshaft

2003-2008 Mopar 4781643AA

Customer Questions & Expert Answers (2)
4781643AA Mopar Engine Crankshaft Illustration 1 of 1
  • Part Description
    Crankshaft
  • Manufacturer
    Mopar
Make sure this part fits
$547.70 MSRP: $835.00
You Save: $287.30 (35%)
Core Charge: $100.00
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4781643AA
    Part DescriptionEngine Crankshaft; Crankshaft
    Item Dimensions23.5 x 8.6 x 8.6 inches
    Item Weight48.20 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4781643AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2003-2008 Chrysler PT Cruiser4 Cyl 2.4LBase, Base Convertible, GT, GT Convertible, Limited, Touring, Touring Convertible
    2003-2006 Chrysler Sebring4 Cyl 2.4LBase Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Sedan, Touring Sedan
    2003-2007 Chrysler Town & CountryBase, EL, LX FWD, LXi FWD
    2003 Chrysler Voyager4 Cyl 2.4LEC, LX
    2003-2007 Dodge Caravan4 Cyl 2.4LC/V, EC, SE
    2003-2007 Dodge Grand CaravanC/V, EL, SE, Sport FWD
    2003-2006 Dodge Stratus4 Cyl 2.4LES, R/T, SE, SXT
    2004-2005 Jeep Liberty4 Cyl 2.4LLimited Edition 4WD, Sport 2WD, Sport 4WD
    2005-2006 Jeep Wrangler4 Cyl 2.4LSE
  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck?
    A:
    You can Select Your Vehicle to check if 4781643AA fits your vehicle.
    Posted and answered by Mopar Parts Specialist Reggie
    Q:
    How can the Crankshaft be removed and installed on Chrysler PT Cruiser? Posted by Kacey B.
    A:
    The crankshaft can only be removed if the engine has been pulled out of the vehicle, provided other parts such as flywheel, crankshaft pulley, timing belt, oil pan, oil pump body, oil filter, balance shafts, carrier assembly and piston/connecting rod assemblies have been removed. As a preparation to the crankshaft removal, the crankshaft end play should be determined by inserting a dial indicator on the crankshaft. Move the crankshaft to the rear, set indicator to zero then move the crankshaft to the front and take the reading it should be between 0.003 and 0.010 inches. Feelers gauges can be used if dial indicator is absent in order to measure clearance. Screw out the main bearing cap assembly bolts slowly and then you can almost take it out with your hand, you only have to hit the bracket gently with a soft padded hammer and lift it up, do not drop the bearings. Slowly raise the crankshaft out, if possible in coordination with another person because of its mass. For installation, it becomes relevant to be certain that the engine block and the crankshaft need to be clean and examined. Align the block in the manner that the bottom is upwards, unbolt the main bearing cap assembly and then clean the bearing areas. New upper main bearing inserts to be fitted in the block and lower inserts in the cap assembly, with correct alignment of oil groves and holes. It is recommended to use Plastigage, and check whether the oil clearance is within the appropriate range. If required, it might be necessary to change the bearing inserts with the ones of appropriate size. Cleans all the bearing surfaces, next, put a thin layer of oil on the bearing insert and the thrust faces and then replace the crankshaft. Screw on the main bearing assembly in the crankshaft and block in the right position and tighten the bolt to the required torque for the right sequence. As far as certain types of engines are concerned, it is required to use certain tightness coefficients and to examine crankshaft end-float. Last begin the crankshaft and turn it for binding for better and smooth rotation before fitting the new rear main oil seal.
    You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Cale / Apr 30, 2026

Genuine Mopar Part 4781643AA, the Right Choice

To ensure reliability, purchase Mopar part # 4781643AA Engine Crankshaft. It is sometimes referred to as Crankshaft. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler PT Cruiser, Sebring, and Town & Country models. It fits Dodge Caravan, Grand Caravan, Stratus. It also fits Jeep Liberty and Wrangler.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 4781643AA Engine Crankshaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.
Shop MoparPartsGiant.com for dedicated service, prompt delivery, and low prices on genuine parts from real OE dealerships.