How do you remove and reinstall the front bumper and grille on Chrysler Cirrus?

Open the hood and support it on the prop rod. Remove the front bumper with the grille attached. Using an appropriate size drill, remove the rivets securing the grille to the bumper and separate the grille from the bumper. Installation is the reverse of removal; the grille can be reattached to the bumper using rivets (if available) or screws, nuts, and washers. If threaded fasteners are used, apply thread locking compound to the screw threads.

Genuine Chrysler Cirrus Grille

Front Grille

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Grilles found

View related parts
Chrysler Cirrus Grille
Part Number: 4630590
Product Specifications
- Other Name: Grille, Fascia
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Cirrus Radiator Grille
Part Number: 4805288AA
Product Specifications
- Other Name: Grille Radiator; Grille
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Cirrus Radiator Grille
Part Number: RK63RMKAA
Product Specifications
- Other Name: Grille, Fascia
- Replaced by: 5018944AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995 Chrysler Cirrus | LX | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Cirrus Radiator Grille
Part Number: 5018944AA
Product Specifications
- Other Name: Grille Radiator
- Replaces: RK63TU1AA, RK63SYLAA, RK63RMKAA, RK63RBKAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Chrysler Cirrus | LXi | 4 Cyl 2.4L, 6 Cyl 2.5L
- 1995 Chrysler Cirrus | LX | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Cirrus Radiator Grille
Part Number: 5018350AA
Product Specifications
- Other Name: Grille Radiator; Grille
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Chrysler Cirrus | LXi | 4 Cyl 2.4L, 6 Cyl 2.5L

Chrysler Cirrus Grille

The Chrysler Cirrus Grille allows fresh air to enter the Chrysler Cirrus. This air will not only keep the engine cool but also prevent damage from stones and other road debris. Over the years, Chrysler complemented this advantage with diverse material options that influence both appearance and sturdiness. In the early Cirrus models, a Grille made of ABS plastic was fitted, which is a lightweight and low-cost panel that does not chip easily and is suitable for everyday travel in the city. Chrysler drivers who run their vehicle on faster highways may also elect for an aluminum Grille whose lightweight and rust-resistant characteristics enhance efficiency while also enabling complex shapes that sharpen the Cirrus front fascia. If you drive a Chrysler over rough roads, the stainless steel version adds weight, but it also offers top-tier protection from mud and flying gravel. Several editions also display a billet style Grille setup to promote better airflow by placing horizontal slats side by side while creating a neat, classy pattern. Every type of Cirrus Grille may look different, but they all cool, protect, and beautify.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Cirrus Grille at great affordable prices. Moreover, all genuine Chrysler Cirrus Grille come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Cirrus Grille Parts Questions & Experts Answers

Grille
4630590
Q: How do you remove and reinstall the front bumper and grille on Chrysler Cirrus?
A:
Open the Hood and support it on the prop rod. Remove the front Bumper with the grille attached. Using an appropriate size drill, remove the rivets securing the grille to the bumper and separate the grille from the bumper. Installation is the reverse of removal; the grille can be reattached to the bumper using rivets (if available) or screws, nuts, and washers. If threaded fasteners are used, apply thread locking compound to the screw threads.