My Garage
My Account
Cart
Genuine Chrysler Sebring Oil Cooler
Engine Oil Cooler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
11 Oil Coolers found
Chrysler Sebring Engine Oil Cooler
Part Number: 4884757AE$103.50 MSRP: $155.00You Save: $51.50 (34%)
Chrysler Sebring Engine Oil Cooler
Part Number: 68000688AA$205.30 MSRP: $304.00You Save: $98.70 (33%)
Chrysler Sebring Engine Oil Cooler
Part Number: 68000688AB$205.30 MSRP: $304.00You Save: $98.70 (33%)
Chrysler Sebring Engine Oil Cooler
Part Number: 68000688AC$205.30 MSRP: $304.00You Save: $98.70 (33%)
Chrysler Sebring Oil Cooler
The Spoiler of Chrysler Sebring and Dodge Avenger vehicles serves to cool the engine oil where its temperature is supposed to be monitored to help it's maintain the proper viscosity and hence run properly. These coolers are in fact an oil-to-water cooler, which means it becomes a part of the car's cooling system and is thus able to bring the oil up to the maximum temperature while avoiding excessive heat. Throughout the lifetime of Chrysler Sebring, numerous types and designs of Oil Coolers have been used with the primary focus of stating factory fitted systems. However, when put under pressure such as when towing or driving under high temperatures and the like the OE coolers may be inadequate. Problems like blockage and rusting can reduce their efficiency and result to instance oil contamination. Those that are struggling with coolers failure or do not have an oil cooler can always opt for the kits and parts which will help improve the cooling capability and increase the durability of the engine.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Oil Cooler at great affordable prices. Moreover, all genuine Chrysler Sebring Oil Cooler come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Sebring Oil Cooler Parts Questions & Experts Answers
- Q: What are the steps involved in the removal and installation process of the oil cooler on Chrysler Sebring?A:In performing this change, first clear the fuel pressure and afterward, further, disconnect the negative terminal on the battery or the remote ground terminal. Next, drain the coolant. Then, take out the lower intake manifold, and the oil cooler mounting screws, and bolts. Go ahead and pull out the oil cooler and throw away the seals. In performing installation, first of all, new seals has to be installed into an oil cooler. Next, fit the oil cooler onto the block and then install the two screws that are used for the mounting, then the two bolts, before you tighten the bolts to the recommended torque. As for the rest of the installation the order is the inversion of the removal order. Last, add more water to the cooling system, start the car and let the engine to reach normal temperature and look for signs of leakage.
