My Garage
My Account
Cart
Genuine Dodge Avenger Tie Rod End
Steering Rod End- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Tie Rod Ends found
Dodge Avenger Tie Rod End
Tie Rod End in Dodge Avenger has the responsibility of joining the steering rack to the steering knuckles in the vehicle. This linkage is crucial in ensuring the vehicle balance besides offering good handling on the vehicles direction. Steering on the Dodge Avenger is governed by both Inner and Outer Tie Rod Ends, assembling of these parts result into effective steering response. There could have been various types of Dodge Avenger Tie Rod Ends used through the years, yet dissociation of the specific types is not disclosed herein. The primary function however is the same for these types and that is to ensure that the steering mechanism is enabled to facilitate improved driving safety and performance.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Tie Rod End at great affordable prices. Moreover, all genuine Dodge Avenger Tie Rod End come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Avenger Tie Rod End Parts Questions & Experts Answers
- Q: How to remove the tie-rod end on Dodge Avenger?A:loosen the wheel lug nuts and raise the vehicle's front. Support it on jack stands, apply the parking brake, and block the rear wheels. Remove the wheel and loosen the jam nut on the tie-rod end, marking its relationship with the threaded portion. Loosen the ball stud nut and use a puller to disconnect the tie-rod end from the Steering Knuckle arm. Remove the nut and separate the tie-rod end. To install, thread the tie-rod end to the marked position and connect it to the steering knuckle arm. Tighten the ball stud nut and jam nut, install the wheel, lower the vehicle, and tighten the lug nuts. Lastly, check and adjust the front-end alignment if needed.
