How to Remove and Install the MAP Sensor on Dodge Daytonas?

Disconnect negative cable at battery. Remove glove box for access to MAP sensor. Unplug vacuum hose and wiring connector, remove retaining bolts and withdraw MAP sensor. Install MAP sensor and tighten bolts. Remove logic module and detach MAP sensor. Install MAP sensor on logic module and install retaining screws.

Genuine Dodge Daytona MAP Sensor

Manifold Air Pressure Sensor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 MAP Sensors found

View related parts
Dodge Daytona M.A.P.-Sensor 2.2&2.5L
Part Number: 4638256
- Other Name: Map Sensor, Turbo
- Replaced by: 5014762AA
More Info
Fits the following Vehicles:
1989-1990 Dodge Daytona | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 3.0L
Less Info
View related parts
Dodge Daytona MAP Sensor, Turbo
Part Number: 5227152
More Info
Fits the following Vehicles:
1987-1990 Dodge Daytona | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 3.0L
Less Info

Dodge Daytona MAP Sensor Parts Questions & Answers

MAP Sensor, Turbo
5227152
Q: How to Remove and Install the MAP Sensor on Dodge Daytonas?
A: Disconnect negative cable at battery. Remove glove box for access to MAP sensor. Unplug vacuum hose and wiring connector, remove retaining bolts and withdraw MAP sensor. Install MAP sensor and tighten bolts. Remove logic module and detach MAP sensor. Install MAP sensor on logic module and install retaining screws.