How to Replace the Throttle Position Sensor on Dodge Durango?

To remove the Throttle Position (TP) sensor, disconnect the battery cable and remove the air intake duct and resonator box. Disconnect the electrical connector from the sensor and remove the mounting screws. Take out the sensor and ensure the locating tangs fit over the flat end of the throttle shaft. If the sensor fits flush and can be rotated, it has been correctly installed. Reverse the steps for installation.

Genuine Dodge Durango Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Throttle Position Sensors found

View related parts
Dodge Durango Throttle Position Sensor Kit
Part Number: 5019411AB
$56.25 MSRP: $85.05
You Save: $28.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor-Throttle Position
- Replaced by: 68404428AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, ST 2WD | 6 Cyl 3.7L
View related parts
Dodge Durango Throttle Position Sensor Kit
Part Number: 5019411AC
$56.25 MSRP: $85.05
You Save: $28.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor-Throttle Position
- Replaced by: 68404428AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L
View related parts
Dodge Durango Throttle Position Sensor Kit
Part Number: 5017479AA
Product Specifications
- Other Name: Sensor-Throttle Position; Throttle Position Sensor, Throttle Sensor
- Replaced by:
- Replaces: 4882219
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2007 Dodge Durango | Base 2WD, Base 4WD, Limited 2WD, Limited 4WD, R/T 4WD, SLT 2WD, SLT 4WD, SLT Plus 2WD, SLT Plus 4WD, Sport 2WD, Sport 4WD, ST 2WD, ST 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.9L, 8 Cyl 4.7L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Durango Throttle Position Sensor
Part Number: 4882219
Product Specifications
- Other Name: Sensorpkg-Throttle Position
- Replaced by: 5017479AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2001 Dodge Durango | Base 2WD, Base 4WD | 6 Cyl 3.9L, 8 Cyl 4.7L, 8 Cyl 5.2L, 8 Cyl 5.9L

Dodge Durango Throttle Position Sensor

Throttle position sensor (TPS) is an essential component found in Dodge Durango cars that helps administer the proportions of air and fuel that is required for burning. The TPS measures the throttle position and passes on real-time signals to the fuel injection system: thereby enabling the engine control unit to ration fuel depending on power needed. This takes place several times per second to make the acceleration and deceleration to be smooth and in orderly manner. Dodge Durango has used all sorts of throttle position sensors ranging from the older potentiometric sensors to the contemporary ones that are non-contact and Hall, Inductive or Magnetoresistance kind. Unlike the older ones that required a direct body contact, the new ones can measure the magnetic field changes improving on the reliability and efficiency. Other related accelerator pedal sensors are incorporated in this kind of system in order to enhance the electronic throttle control system, therefore adding the efficiency factor to Dodge Durango vehicles.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Durango Throttle Position Sensor at great affordable prices. Moreover, all genuine Dodge Durango Throttle Position Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Durango Throttle Position Sensor Parts Questions & Experts Answers

Throttle Position Sensor Kit
5019411AC
Q:
How to Replace the Throttle Position Sensor on Dodge Durango?
A:
To remove the Throttle Position (TP) sensor, disconnect the battery cable and remove the air intake duct and resonator box. Disconnect the electrical connector from the sensor and remove the mounting screws. Take out the sensor and ensure the locating tangs fit over the flat end of the throttle shaft. If the sensor fits flush and can be rotated, it has been correctly installed. Reverse the steps for installation.