How do you remove and replace the latch assembly and hood release cable on Dodge Grand Caravan?

To unlock the side latch mechanisms, it is necessary to unbolt and disengage the latch assembly, and tighten the cable end using a screwdriver. To gain access to the cable-latch connection, the latch can be pulled out or the push-in fasteners, which are rather small, can be removed with a small screwdriver in order to remove the black plastic latch cover. Inside the passenger compartment, take out the screws to loose the hood release cable and handle assembly; under the dashboard, there is a cable grommet which has to be removed from the firewall. Then, take a string or wire and fasten it to the engine part of the end of the cable, unscrew the end, and cable guide to the fire wall surface and pull it into the passenger part of the car. Secure the string or the wire to the new cable that must be pulled through the firewall to the engine compartment to finish the process of installation that can be done by reversing the above mentioned removal procedures.

Genuine Dodge Grand Caravan Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hood Cables found

View related parts
Dodge Grand Caravan Hood Latch Release
Part Number: 68067136AB
$64.63 MSRP: $95.75
You Save: $31.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Release Hood Latch
- Replaced by: 68067136AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2019 Dodge Grand Caravan | C/V, Crew, Express, GT, LUX, Mainstreet, R/T, SE, SXT | 6 Cyl 3.6L
View related parts
Dodge Grand Caravan Hood Latch Release
Part Number: 5109272AA
$64.63 MSRP: $95.75
You Save: $31.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Release Hood Latch Cable
- Replaced by: 5109272AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Grand Caravan | C/V, SE, SXT | 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Dodge Grand Caravan Hood Latch Release
Part Number: 68067136AC
$64.63 MSRP: $95.75
You Save: $31.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Release-Hood Latch; Release Cable
- Replaces: 68067136AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Dodge Grand Caravan | C/V, Crew, Express, GT, LUX, Mainstreet, R/T, SE, SXT | 6 Cyl 3.6L
View related parts
Dodge Grand Caravan Hood Latch Release
Part Number: 5109272AB
$64.63 MSRP: $95.75
You Save: $31.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Release Hood Latch
- Replaced by: 5109272AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Grand Caravan | C/V, Crew, Hero, SE, SXT | 6 Cyl 3.3L, 6 Cyl 3.6L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
Dodge Grand Caravan Release A-Assembly - I/S Hood Latch
Part Number: 4673097
Product Specifications
- Other Name: Release Assembly, Inside Hood Latch; Release Cable
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995 Dodge Grand Caravan | Base, LE AWD, LE FWD, SE AWD, SE FWD | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L

Dodge Grand Caravan Hood Cable

Dodge Grand Caravan Hood Cable is the vital link that allows the interior release handle to unhook the latches for a smooth lifting of the hood for service. The Hood Cable runs from the lever to a junction beneath the panel. Here it separates into two strands that run to each latch. Thus, a light pull is enough to send a force that pops both catches together. The early Dodge models applied a one-piece Hood Cable that ran straight to a single latch. This design was later changed for Dodge minivans to a dual-section Hood Cable that would attach to twin latches. This added more security and also made it easier to replace segments if only one strand frays on your Grand Caravan. Though there are minor differences in routing and sheath material between numerous Grand Caravan trims, the pull-and-release method is always identical. Ensuring the operation of your Dodge Grand Caravan Hood Cable is key to your unique everyday life. Unfortunately, stretching, cracking, or water intrusion can rob the hood of its tension, leaving it stuck. Therefore, inspection should occur in a timely manner.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Grand Caravan Hood Cable at great affordable prices. Moreover, all genuine Dodge Grand Caravan Hood Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Grand Caravan Hood Cable Parts Questions & Experts Answers

Hood Latch Release
5109272AA
Q: How do you remove and replace the latch assembly and hood release cable on Dodge Grand Caravan?
A:
To unlock the side latch mechanisms, it is necessary to unbolt and disengage the latch assembly, and tighten the cable end using a screwdriver. To gain access to the cable-latch connection, the latch can be pulled out or the push-in fasteners, which are rather small, can be removed with a small screwdriver in order to remove the black plastic latch cover. Inside the passenger compartment, take out the screws to loose the hood release cable and handle assembly; under the dashboard, there is a cable grommet which has to be removed from the firewall. Then, take a string or wire and fasten it to the engine part of the end of the cable, unscrew the end, and cable guide to the fire wall surface and pull it into the passenger part of the car. Secure the string or the wire to the new cable that must be pulled through the firewall to the engine compartment to finish the process of installation that can be done by reversing the above mentioned removal procedures.