How to Install the Brake Light Switch on Dodge Magnum?

Remove lower instrument panel insulator. Rotate brake light switch 30 degrees counterclockwise and disconnect electrical connector. Pull plunger out, depress brake pedal, install switch in bracket, release pedal and pull up. Switch is now adjusted and installed.

Genuine Dodge Magnum Brake Light Switch

Brake Lamp Switch

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Brake Light Switches found

View related parts
Dodge Magnum Switch-Stop Lamp
Part Number: 4671336AB
- Other Name: Switch Stop Lamp
- Replaced by: 4671336AD
$21.83 MSRP: $31.65
You Save: $9.82 (32%)

Add to Cart
More Info
Fits the following Vehicles:
2007-2008 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD, SXT RWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
Less Info
View related parts
Dodge Magnum Switch-Stop Lamp
Part Number: 4671336
- Other Name: Switch Stop Lamp
- Replaced by: 4671336AD
More Info
Fits the following Vehicles:
2005-2006 Dodge Magnum | R/T AWD, R/T RWD, SE RWD, SRT8 RWD, SXT AWD | 6 Cyl 2.7L, 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
Less Info

Dodge Magnum Brake Light Switch Parts Questions & Answers

Switch-Stop Lamp
4671336AB
Q: How to Install the Brake Light Switch on Dodge Magnum?
A: Remove lower instrument panel insulator. Rotate brake light switch 30 degrees counterclockwise and disconnect electrical connector. Pull plunger out, depress brake pedal, install switch in bracket, release pedal and pull up. Switch is now adjusted and installed.