My Garage
My Account
Cart
Genuine Dodge Neon Fuel Rail
Engine Fuel Rail- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Fuel Rails found
Dodge Neon Fuel Rail
The Fuel Rail of the Dodge Neon is a major part of the injection system that helps supply fuel at very high pressure to every injector to provide the engine with fuel for its smooth power and clean fumes. The Fuel Rail is located along the intake runners to which it is fitted. The electric pump sends fuel to the Fuel Rail, which is helped by a regulator to maintain constant pressure and is sensed by the powertrain control module that adjusts injector pulse width according to speed and load. The early Dodge throttle body injection models employed a single central injector and therefore did not have their own dedicated Fuel Rail. However, during the time when port injection came to the second-generation Dodge Neon, a slim, steel or aluminum Fuel Rail became standard. This unit feeds the four individual injectors just ahead of the valves. So this change did get noticed by many Neon owners with a smoother idle. Subsequent versions introducing gasoline direct fuel injection ultimately received a common rail configuration that drives pressure much higher, leading to finer droplets and more complete combustion. The Dodge Neon from any model year relies on a proper Fuel Rail to start easy, rev easy, and avoid excess emissions.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Fuel Rail at great affordable prices. Moreover, all genuine Dodge Neon Fuel Rail come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Neon Fuel Rail Parts Questions & Experts Answers
- Q: How to Remove and Install the Fuel Injector and Fuel Rail on Dodge Neon?A:To relieve system fuel pressure, disconnect the fuel supply line from the fuel rail by squeezing the two tabs on the quick-connect fitting and pulling up. Next, disconnect the negative battery cable and fuel supply line from the fuel rail. Push up on the lock and squeeze the tab to disconnect the fuel injector electrical connectors.
