My Garage
My Account
Cart
Genuine Dodge Neon Tie Rod End
Steering Rod End- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Tie Rod End found
Dodge Neon Tie Rod End
In particular, the Tie Rod End in Dodge Neon plays a significant role in the part of the car connected to the steering system, namely the connection between the steering rack and the steering knuckles. This connection plays the role in keeping the stability of vehicles and in delivering the accurate control of its direction. The Dodge Neon comes with both Inner and Outer Tie Rod Ends, these are components which contribute to the responsiveness of the car's Steering. There are really many variations of Tie Rod Ends that are used in Dodge Neon, but there are no distinction between these types. Regardless of the variations, the primary function remains consistent: for the provision of proper turning and stability of the vehicle which is required. The Tie Rod End plays a great role of the steering of the Dodge Neon thus making it as one of the most important of the steering system.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Tie Rod End at great affordable prices. Moreover, all genuine Dodge Neon Tie Rod End come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Neon Tie Rod End Parts Questions & Experts Answers
- Q: How do you properly remove and reinstall a tie-rod end on Dodge Neon?A:First, one needs to unscrew the wheel lug nuts, engage the parking brake, lift the front of the car and set it on jack stands before finally removing the front wheel. Then unscrew the nut at the tie-rod end stud but if the stud rotates, clamp it using a spanner. Place the lock pliers or the wrench on the tie-rod so as to gather and twist the jam nut enough to align the tie-rod end with the tie-rod threads , you'll then release the pliers and retrace the length of the threads with your pencil. Remove the tie rod to the Steering Knuckle, by unscrewing the nut of the tie rod end stud and applying the two jaw puller to push the stud and free the tie-rod using the recorded technique of how the heat shield is fixed to the knuckle arm. Remove the tie-rod end from the tie-rod, then, screw the tie-rod end to the marked position and then having the tie-rod stud through to the steering knuckle arm while ensuring the heat shield is properly placed hence lock the jam nut tightly. Place the nut over the stud and tighten to the manufactures recommended torque and then place the wheel, lower the vehicle and tighten the lug nuts to the manufactures recommended torque. Last but not the least, get the wheels alignment and have it done if there is a need too.
