My Garage
My Account
Cart
Genuine Dodge Neon Turn Signal Flasher
Turn Signal Indicator Flasher- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Turn Signal Flashers found
Dodge Neon Turn Signal Flasher
The Dodge Neon Turn Signal Flasher is responsible for the regular blinking that warns others of an approaching lane change or turn by this little sedan. Housed in the fuse block, the Turn Signal Flasher reacts as soon as a signal is sent from the steering-column stalk, cycling power to the corner bulbs in timed intervals. The early models of Dodge Neon cars utilized a thermal Turn Signal Flasher, whose bi-metal strip was heated, bent, touched, cooled, and repeated to create light and the signature click sound. Subsequent editions and contemporary Dodge models utilize a solid-state Turn Signal Flasher that relies on transistors and a timing chip. This version has no moving parts, but it still mimics the recognizable sound that many Neon owners enjoy. The thermal style requires the higher current draw of incandescent lamps, while the electronic unit works perfectly well with low-draw LEDs, lasts longer, and maintains steady flash speed, a benefit seen with recent Neon versions. The Turn Signal Flasher is the likely culprit on a Dodge if indicators quit or strobe.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Turn Signal Flasher at great affordable prices. Moreover, all genuine Dodge Neon Turn Signal Flasher come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Neon Turn Signal Flasher Parts Questions & Experts Answers
- Q: What are the common issues and replacement steps for a turn signal and hazard flasher unit on Dodge Neon?A:The turn signal and the hazard flasher knob is a single combination unit and if it is working fine, it makes a clicking sound. If further one turn signal fails and the clicker does not click or if while making regular turn signals, one of the bulbs flashes much faster while the other does not light at all, very high probability the turn signal bulbs are at fault. That is why if both of the turn signals do not blink, it may be a Fuse, a flasher unit, a turn signal switch or some other turn signal related part that is bad. One can get to the fuse box and discover a problem; a bad turn signal fuse should be checked for a short before replacing it. To remove the flasher, the upper steering column cover must be removed, then the electrical connector should be disconnected and the flasher unit should be pulled out of the mounting bracket which is on the top of the steering column behind the multi-function switch. Make sure that the taking out unit is a perfect match of the unit being replaced prior to installation as is the process in the reverse order of removal.
