My Garage
My Account
Cart
Genuine Dodge Nitro Timing Belt Tensioner
Engine Timing Belt Tensioner- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Timing Belt Tensioner found
Dodge Nitro Timing Belt Tensioner
The Timing Belt Tensioner in Dodge Nitro vehicles is a necessity since it facilitates on maintaining the tension on the belt so that it does not slip. This component successfully pulls on the timing belt that is essential for the right operation of the timing system of the engine. Dodge Nitro timing belt tensioners can be bought as individual pieces, or as kits or sets depending on the need of the vehicle, the timing belt tensioners can be required for the fan, the alternator as well as the air conditioning system. Although the overview does not discuss the types or styles of a Timing Belt Tensioner that would be used for different model of Dodge Nitro, the focus on the variety of applications demonstrate the part's roles in ensuring proper performance and durability in the function of the vehicle.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Nitro Timing Belt Tensioner at great affordable prices. Moreover, all genuine Dodge Nitro Timing Belt Tensioner come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Nitro Timing Belt Tensioner Parts Questions & Experts Answers
- Q: How to remove and install a timing belt and Timing Belt Tensioner in four cylinder engine on Dodge Nitro?A:To go out with the Timing Belt, it is necessary to unbolt the timing belt idler pulley and then the pulley itself. Then to take off the camshaft sprocket, apply a suitable holding tool to remove the camshaft sprocket bolts, while at the same time making sure that the two camshafts do not turn while removing the bolts and then pry of the two sprockets using two large screwdrivers. Then, take out the bolts for the rear timing belt cover and put off the rear cover, then the bolt as well as the timing belt tensioner assembly at the lower side should be unbolted. For installation of the timing belt tensioner fix it in front of the engine and tighten only one lower mounting bolt. Thread an engine bracket mounting bolt into the upper tensioner bolt hole as far as five- to seven-turns and then fully tighten the lower tensioner bolt to the 32 lb ft/35 Nm torque; remove the upper bolt. Then, fit in the rear timing belt cover and tighten the screws on the cover, after which fix the timing belt idler pulley with a bolt tightened to the recommended torque. Last but not the least, fit in each camshaft sprocket so that the pin of the camshaft fits into the hole of the sprocket and hold the sprocket with the help of some special tool and fasten the nut to the required torque before putting on the timing belt.
