My Garage
My Account
Cart
Genuine Jeep Comanche Rack And Pinion
Steering Rack And Pinion- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Rack And Pinions found
Jeep Comanche Rack And Pinion
Steering rack of any car is an essential part that effects the steering wheel's rotary movement into forward sideways movement of the front wheels of Jeep Comanche vehicles. It is based on the rack and pinion configuration where pinion gear is fastened to the steering column while the rack gear is encased in a metal tube, which translates the movement of the steering wheel to the wheels. Jeep Comanche models mainly have power-facilitated rack and pinion steering attachments mainly for the ease of usage and the responsiveness of the cars. Although straight gears are the most effective, helical gears might be employed, but they come with such cons as wear among others. In the course of its use, there are some challenges that may be encountered in Jeep Comanche vehicles which include, leakage, worn gears, and damaged seal that may in one way or the other affect the functionality of the steering rack thereby need to undergo repair or replacement to ensure that it operated effectively in order to enhance the handling and control of the car.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Comanche Rack And Pinion at great affordable prices. Moreover, all genuine Jeep Comanche Rack And Pinion come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Comanche Rack And Pinion Parts Questions & Experts Answers
- Q: How to Remove and Install a Rack and Pinion Steering Gear on Jeep Comanche?A:Raise the front of the vehicle and support it securely on jackstands. Apply the parking brake. Place a drain pan under the rack and pinion (power steering only). Remove the hoses/lines and cap the ends to prevent excessive fluid loss and contamination. Use a flare-nut wrench to remove the hoses/lines. Mark the relationship of the intermediate shaft lower universal joint to the rack and pinion input shaft. Remove the intermediate shaft lower pinch bolt. Remove the Pitman arm nut and washer. Mark the relationship of the Pitman arm to the shaft. Separate the Pitman arm from the shaft with a two-jaw puller. Support the rack and pinion and remove the mounting bolts. Lower the unit, separate the intermediate shaft from the rack and pinion input shaft and remove the rack and pinion from the vehicle. Raise the rack and pinion into position and connect the intermediate shaft, aligning the marks. Install the mounting bolts and washers and tighten them to the specified torque. Slide the Pitman arm onto the shaft, making sure the marks are aligned. Install the washer and nut and tighten the nut to the specified torque. Install the intermediate shaft lower pinch bolt and tighten it to the specified torque. Connect the power steering hoses/lines to the rack and pinion and fill the power steering pump reservoir with the recommended fluid. Lower the vehicle and bleed the steering system.
