How to Replace a Blower Motor Resistor and Blower Motor on Jeep Compass?

Disconnect battery cable from negative terminal. Remove blower motor assembly by disconnecting electrical connector and three screws. Install in reverse order. Disconnect electrical connector from power module, remove screws and detach from housing. Install in reverse order. Disconnect electrical connector from blower motor resistor, remove screws and detach from housing. Install in reverse order.

Genuine Jeep Compass Blower Motor

A/C Heater Blower Motor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Blower Motors found

View related parts
Jeep Compass Motor-Blower With Wheel
Part Number: 5191345AA
- Other Name: Motor Blower with Wheel; Blower Motor, Dash Control Unit
$169.94 MSRP: $255.00
You Save: $85.06 (34%)

Add to Cart
More Info
Fits the following Vehicles:
2007-2017 Jeep Compass | Base 4WD, Base FWD, Latitude 4WD, Latitude FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD | 4 Cyl 2.0L, 4 Cyl 2.4L
Less Info
View related parts
Jeep Compass Motor-Blower
Part Number: 68350343AA
- Other Name: Blower Motor
$136.05 MSRP: $198.00
You Save: $61.95 (32%)
More Info
Fits the following Vehicles:
2018-2021 Jeep Compass | 80th Spec. Edition AWD, 80th Spec. Edition FWD, Latitude AWD, Latitude FWD, Limited AWD, Limited FWD, Sport AWD, Sport FWD, Trailhawk AWD | 4 Cyl 2.4L
Less Info

Jeep Compass Blower Motor Parts Questions & Answers

Motor-Blower With Wheel
5191345AA
Q: How to Replace a Blower Motor Resistor and Blower Motor on Jeep Compass?
A: Disconnect battery cable from negative terminal. Remove blower motor assembly by disconnecting electrical connector and three screws. Install in reverse order. Disconnect electrical connector from power module, remove screws and detach from housing. Install in reverse order. Disconnect electrical connector from blower motor resistor, remove screws and detach from housing. Install in reverse order.