My Garage
My Account
Cart
Genuine Jeep Grand Cherokee Ball Joint
Control Arm Joint- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
11 Ball Joints found
Jeep Grand Cherokee BALLJOINT-Upper Control Arm
Part Number: 52088808AB$128.52 MSRP: $185.00You Save: $56.48 (31%)
Jeep Grand Cherokee Lower Control Arm Ball Joint
Part Number: 68069648AB$66.38 MSRP: $98.35You Save: $31.97 (33%)
Jeep Grand Cherokee Lower Control Arm Ball Joint
Part Number: 68298603AB$80.55 MSRP: $122.00You Save: $41.45 (34%)
Jeep Grand Cherokee Lower Control Arm Ball Joint
Part Number: 5135651AE$54.76 MSRP: $78.35You Save: $23.59 (31%)
Jeep Grand Cherokee Lower Control Arm Ball Joint
Part Number: 5135651AD$54.76 MSRP: $78.35You Save: $23.59 (31%)
Jeep Grand Cherokee Ball Joint Package Lower Control Arm
Part Number: 5135651AB$54.76 MSRP: $78.35You Save: $23.59 (31%)
Jeep Grand Cherokee Lower Control Arm Ball Joint
Part Number: 5135651AC$54.76 MSRP: $78.35You Save: $23.59 (31%)
Jeep Grand Cherokee BALLJOINT-KNUCKLE
Part Number: 5016972AC$247.07 MSRP: $452.00You Save: $204.93 (46%)Jeep Grand Cherokee BALLJOINT-KNUCKLE
Part Number: 5014876AC$443.70 MSRP: $528.00You Save: $84.30 (16%)Jeep Grand Cherokee BALLJOINT-KNUCKLE
Part Number: 5014877AC$249.80 MSRP: $487.00You Save: $237.20 (49%)
Jeep Grand Cherokee Ball Joint
ball joint is one of the many parts of Jeep Grand Cherokee automobiles, whose main responsibility is to join the suspension control arms with the steering knuckles. This design enables the prolonged free rotation in many planes making it easier for the vehicle to handle road conditions and the steering commands given. Usual Ball Joint is made from steel incorporating a bearing stud and socket are covered by rubber boot to reduce risks from contamination from dirt besides being used for lubrication. The Ball Joints may vary due to the Jeep Grand Cherokee models wherein some may be load-bearing Ball Joints while some others may not be load-bearing ones. Load carrying Ball joints are located in the lower position and it bears the total load of the vehicle, whereas non- load carrying Ball joints are used for maintaining the correct path without being under any load. Eventually the Ball Joints will experience wear as a result of usage and absence of recommended lubrication and this will manifest in production of noise and abnormal wearing of tires. Semi-permanent upgrades comprise Ball Joints that are adjustable and complete control arms are provided for better alignment and performance of altered Jeep Grand Cherokee cars.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Grand Cherokee Ball Joint at great affordable prices. Moreover, all genuine Jeep Grand Cherokee Ball Joint come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Grand Cherokee Ball Joint Parts Questions & Experts Answers
- Q: How to Inspect and Replace Ball Joints in Control Arms on Jeep Grand Cherokee?A:Inspect the Control Arm balljoints for looseness whenever either is separated from the Steering Knuckle by attempting to turn the ballstud in its socket with your fingers; if it is loose or can be turned, replace the balljoint. To check the upper balljoint with the suspension assembled, first loosen the front wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands before removing the wheel. Then, raise the lower control arm with a floor jack to simulate normal ride height. Using a large prybar inserted between the upper control arm and the steering knuckle, pry upwards on the upper control arm, noting that up to 0.020-inch movement is allowed, which can be measured with a dial indicator. If accurate measurement is not possible, have the balljoint checked at an automotive repair shop. If replacement is necessary, remove the upper control arm, as the balljoint is press fit in it, requiring a special press tool and receiver cup for removal and installation, which can be rented from equipment rental yards or auto parts stores. If access to this tool is unavailable, take the vehicle or lower control arm to an automotive machine shop or qualified repair facility for balljoint replacement. For the lower balljoint, raise the vehicle and support it securely on jackstands, then place a floor jack under the lower control arm near the outer end and raise it until the upper control arm lifts off its rebound bumper. Insert the prybar between the top of the balljoint and the steering knuckle and pry down, again noting that up to 0.020-inch movement is allowed, which can be checked with a dial indicator. If replacement is indicated, remove the lower control arm, as the balljoint is press fit in it and requires the same special press tool for removal and installation, available for rent or through a qualified repair facility. Some balljoint replacement tools resemble a heavy-duty C-clamp, allowing for separation of the balljoint from the steering knuckle without removing the entire assembly.
Related Jeep Grand Cherokee Parts
Browse by Year
2022 Ball Joint 2021 Ball Joint 2020 Ball Joint 2019 Ball Joint 2018 Ball Joint 2017 Ball Joint 2016 Ball Joint 2015 Ball Joint 2014 Ball Joint 2013 Ball Joint 2012 Ball Joint 2011 Ball Joint 2010 Ball Joint 2009 Ball Joint 2008 Ball Joint 2007 Ball Joint 2006 Ball Joint 2005 Ball Joint 2004 Ball Joint 2003 Ball Joint 2002 Ball Joint 2001 Ball Joint 2000 Ball Joint 1999 Ball Joint