How to Replace a Rack and Pinion Boot and Ensure Proper Installation on Jeep Grand Cherokee?

Lose the wheel lugs and then jack up the vehicle before placing jackstands before you remove the wheel. Subsequently, in order of loosening, the next one is the tie-rod end and the subsequent is the jam nut. Then unfasten the rack and pinion boot clamps and pull the boot, observing if there is a lot of power steering fluid, if there is, then it is an indication that the rack seals have leaked, then replace the power steering gear with a new or rebuilt one. Prior to fitting the new boot cover the threads and serration at the end of the steering rod with some adhesive tape to avoid harming the small end of the new boot. Insert the new boot into the place of the old one on the steering gear and slide it until it is firmly engaged with the grooves; then new clamps should be fitted. After the removal of the tape, the tie-rod end is to be fitted. Lastly put in the wheel and the lug nuts, let the car down and tighten the lug nuts to the recommended torque setting and check the front end alignment and realign if needed.

Genuine Jeep Grand Cherokee Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rack and Pinion Boots found

View related parts
Jeep Grand Cherokee Steering Gear
Part Number: 68303628AB
$28.37 MSRP: $40.85
You Save: $12.48 (31%)
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod Boot
- Replaces: 68303628AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2021 Jeep Grand Cherokee | Laredo AWD, Laredo RWD, Limited AWD, Limited RWD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Steering Gear Boot
Part Number: 68303628AA
$28.37 MSRP: $40.85
You Save: $12.48 (31%)
ADD TO CART
Product Specifications
- Other Name: Boot Kit Steering Gear
- Replaced by: 68303628AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2019 Jeep Grand Cherokee | Laredo AWD, Laredo RWD, Limited AWD, Limited RWD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Steering Gear
Part Number: 68543853AA
$15.96 MSRP: $23.10
You Save: $7.14 (31%)
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS

Jeep Grand Cherokee Rack and Pinion Boot

The Rack and Pinion Boot in Jeep Grand Cherokee is very important in ensuring that the steering rack does not get into contact with dirt or any other contaminant. This rubber part creates a barrier of another kind at the top and at the bottom of the rack to prevent the growth of dirt and damage of internal parts. In the long run, the Rack and Pinion Boot which is made of rubber like material might develop some cracks or be damaged in some way and this might increase the susceptibility of the rack, and pinion system to failure. While the overview does not specify different types or styles of Rack and Pinion Boot used in various Jeep Grand Cherokee models, the primary function remains consistent across the lineup: to protect the integrity of the steering system you're going to need to seal everything off from the environment.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Grand Cherokee Rack and Pinion Boot at great affordable prices. Moreover, all genuine Jeep Grand Cherokee Rack and Pinion Boot come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Grand Cherokee Rack and Pinion Boot Parts Questions & Experts Answers

Steering Gear Boot
68303628AA
Q: How to Replace a Rack and Pinion Boot and Ensure Proper Installation on Jeep Grand Cherokee?
A:
Lose the wheel lugs and then jack up the vehicle before placing jackstands before you remove the wheel. Subsequently, in order of loosening, the next one is the tie-rod end and the subsequent is the jam nut. Then unfasten the rack and pinion boot clamps and pull the boot, observing if there is a lot of power steering fluid, if there is, then it is an indication that the rack seals have leaked, then replace the power steering gear with a new or rebuilt one. Prior to fitting the new boot cover the threads and serration at the end of the steering rod with some adhesive tape to avoid harming the small end of the new boot. Insert the new boot into the place of the old one on the steering gear and slide it until it is firmly engaged with the grooves; then new clamps should be fitted. After the removal of the tape, the tie-rod end is to be fitted. Lastly put in the wheel and the lug nuts, let the car down and tighten the lug nuts to the recommended torque setting and check the front end alignment and realign if needed.