My Garage
My Account
Cart
Genuine Jeep Liberty Accelerator Cable
Choke Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Accelerator Cables found
Jeep Liberty Accelerator Cable
The function of the Jeep Liberty Accelerator Cable is to allow the driver's foot to control engine power by directly connecting the accelerator pedal to the throttle plate in the intake. The cable helps convert the motion of the accelerator pedal into airflow and fuel that goes to the engine to allow for combustion in the pistons. When the pedal is pressed, this flexible steel wire inside a low friction housing pulls the throttle plate open. In the same way, the plate closes again under spring tension when the pedal is released. So, the Accelerator Cable provides smooth, predictable response at every speed. The basic Accelerator Cable layout was the same throughout the Liberty lineup with a pedal mounted clevis at one end and a barrel style fitting at the throttle lever. This means the feel for owners will be identical across model years. A properly adjusted Accelerator Cable is essential for maintaining the ideal air fuel mix, allowing for quick starts and efficient cruising because the carburetor meters fuel according to how far the plate opens. The Liberty has retained a purely mechanical path as opposed to the electronic throttle systems on newer Jeep models, something many Jeep enthusiasts appreciate, and many Liberty drivers have noted how the pedal feedback is direct. The Jeep's Accelerator Cable undergoes regular inspection to check for fraying, binding, and excess slack so that it continues to provide reliable, immediate engine response.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Liberty Accelerator Cable at great affordable prices. Moreover, all genuine Jeep Liberty Accelerator Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Liberty Accelerator Cable Parts Questions & Experts Answers
- Q: How to Remove the Accelerator Cable on Jeep Liberty?A:To remove the accelerator cable, remove the air intake duct/resonator from the Throttle Body, rotate the throttle lever, and detach the cable end. Press the tab and release the retainer from the bracket. Underneath the dash, remove the retainer clip and detach the cable from the accelerator pedal. Detach the cable from the routing clips and remove it from the engine compartment. Installation is the reverse of removal.
