My Garage
My Account
Cart
Genuine Jeep Patriot Oil Cooler
Engine Oil Cooler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Oil Coolers found
Jeep Patriot Transmission Oil Cooler
Part Number: 68093003AA$302.76 MSRP: $641.00You Save: $338.24 (53%)
Jeep Patriot Auxiliary Transmission Oil Cooler Kit
Part Number: 68025160AA$204.75 MSRP: $303.00You Save: $98.25 (33%)
Jeep Patriot Transmission Oil Cooler
Part Number: 68004297AA$302.76 MSRP: $641.00You Save: $338.24 (53%)
Jeep Patriot Oil Cooler
The Oil Cooler is an important component of Jeep Patriot automobile as it is responsible for controlling the temperature of the engine oil to enhance the efficiency and also the lifespan of the engine. As the Oil Cooler is designed to be mounted within the vehicle's cooling system, it specifically uses an oil to water cooling system in order to rapidly warm oil to working temperature without overheating it. Different types of Oil Coolers have been used in different Jeep Patriot models over the years and Factory installed options are most popular. However, OE coolers may lack the capacity to meet the service demanding situations like towing or driving under high temperatures resulting in clogging or corrosion failure. oil cooler kits can improve the capability of cooler systems hence increasing the life spans of the oil and the engine in Jeep Jeep Patriots.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Oil Cooler at great affordable prices. Moreover, all genuine Jeep Patriot Oil Cooler come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Oil Cooler Parts Questions & Experts Answers
- Q: How to service the transaxle oil cooler and air conditioning condenser on Jeep Patriot?A:For 6F24 (6-speed) models, the transaxle oil cooler and air conditioning condenser are serviced as an assembly. Begin by loosening the left-front wheel lug nuts, then raise the vehicle and support it securely on jackstands before removing the left-front wheel. Next, remove the left-front inner fender splash shield. Drain the engine coolant and disconnect and cap the coolant lines to the cooler, followed by removing the transaxle cooler lines and capping all ends. Disconnect and cap the transaxle cooler lines and ends of the cooler, then remove the transaxle cooler mounting bolts to take the cooler off the side of the transaxle. If equipped, remove the cooler fluid filter and discard the sealing ring from the cooler, then install a new filter into the transaxle. Install a new O-ring onto the cooler, place the cooler onto the transaxle, and install the mounting bolts, tightening them to the specified torque. The installation process is the reverse of removal, and finally, refill the cooling system and check the transaxle fluid level.
