My Garage
My Account
Cart
Genuine Jeep Patriot Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Shift Cables found
Jeep Patriot Transmission Gearshift Control Cable
Part Number: 5062120AF$124.88 MSRP: $188.00You Save: $63.12 (34%)
Jeep Patriot Transmission Gearshift Control Cable
Part Number: 5062120AE$124.88 MSRP: $188.00You Save: $63.12 (34%)
Jeep Patriot Transmission Gearshift Control Cable
Part Number: 5062120AC$124.88 MSRP: $188.00You Save: $63.12 (34%)
Jeep Patriot Transmission Gearshift Control Cable
Part Number: 5062056AC$236.38 MSRP: $356.00You Save: $119.62 (34%)
Jeep Patriot Shift Cable
The Jeep Patriot Shift Cable lets drivers pick gears with confidence by directly linking the floor shifter to the transmission. Running inside a protective sleeve, the Shift Cable preserves traditional Jeep driving feel by converting each hand movement into accurate motion at the transmission lever so Park, Reverse, Neutral, Drive and Low snap in cleanly. Early Patriot models with front wheel drive manual gearboxes applied a twin Shift Cable setup, one to select the shift gate and one to engage the gear, while automatic Patriot versions rely on a single selector Shift Cable that clips to the transmission arm. Both styles serve the same mission, yet the manual layout endures more push-pull stress from constant gear changes, whereas the automatic design focuses on crisp range selection and cooperation with the brake-pedal interlock. Over time a stretched or broken Shift Cable causes loose feel, missed gears or a shifter stuck in place, making prompt replacement vital for any Jeep enthusiast who wants their Patriot and every other Jeep in the driveway to stay smooth and dependable.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Shift Cable at great affordable prices. Moreover, all genuine Jeep Patriot Shift Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Shift Cable Parts Questions & Experts Answers
- Q: How to remove and install the shift cable in automatic transmission on Jeep Patriot?A:Now to remove shift cable first engage the gearshift in park, then unbolt the battery and battery tray and then the air filter housing. Remove the trim panel with your hands, pull the shift cable out and up to remove it from the shift lever; to disconnect further remove the clip with pliers. Second, pop the center console as on the previous stage and disconnect the shift cable from the shifter assembly , one can do it using only trim panel tool and needle-nose pliers to undo the cable fastener screw. Lift the car with jackstands safely, and then detach the grommet of the floor pan and get the shift cable to come out of the hole, while undoing the retainers from below the car, and then fully removing the cable. For installation, reverse the removal steps with considerable emphasis in feeding the shift cable into the passenger compartment and adequate attention to the grommet which should be lubricated if it is necessary. For adjustment, the vehicle must be parked on a flat ground, the parking brake engaged and the shift lever placed in the 'Park' position with the key withdrawn from the ignition. Turn the shift cable adjustment bolt at the transaxle shift lever until it is locked and then push as much as possible the shift lever to the Park position. Screw the adjustment bolt with the required amount of torque, operate the shift lever to evaluate how smooth its movement is and subsequently, the engine should start only if the vehicle is in Park or Neutral. Last, move the transaxle lever through all the gears in order to test the cables and if necessary, make rereadjustment.
