How to remove and install the door handle, door latch assembly, and door lock cylinder on a Jeep Wagoneer?

Remove the door trim panel and water shield. Remove the door window glass. Remove the access plug in the end of the door. Remove the three door latch retaining screws from the end of the door, disconnect the links, then remove the latch and solenoid. On power door locks, it will be necessary to drill out the rivets retaining the solenoid to the door. Installation is the reverse of removal. Tighten the door latch retaining screws securely. Disconnect the link from the lock cylinder. Use pliers to slide the retaining clip off and remove the lock cylinder from the door. Installation is the reverse of removal. After installation, check the latch link free play by pressing the door handle release button in. Check that the latch link starts to move after the button moves about 1/64-inch. If necessary, loosen the adjusting screw on the latch, adjust the free play and then retighten it. Remove the retaining nuts, pull the handle out, detach the control rod and remove the handle from the door. Installation is the reverse of removal. Tighten the retaining nuts securely.

Genuine Jeep Wagoneer Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Door Latch Assemblys found

View related parts
Jeep Wagoneer Front Right Passenger Side Door Lock Latch
Part Number: 55000766
$136.82 MSRP: $174.10
You Save: $37.28 (22%)
ADD TO CART
Product Specifications
- Other Name: Latch-Door-Rh ; Latch, Front Door, Right; Lock
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.0L, 6 Cyl 4.2L
View related parts
Jeep Wagoneer MULTIFUNCTION
Part Number: 68592468AA
$14.81 MSRP: $30.05
You Save: $15.24 (51%)
ADD TO CART
Product Specifications
- Other Name: Tensioner
- Position: Passenger Side
- Replaces: 68565738AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Front Door Latch
Part Number: 68366540AE
$56.87 MSRP: $84.35
You Save: $27.48 (33%)
ADD TO CART
Product Specifications
- Other Name: LATCH-FRONT DOOR; Latch, Lock Actuator
- Position: Passenger Side
- Replaced by: 68366540AF
- Replaces: 68366540AA, 68366540AB, 68366540AC, 68366540AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Rear Door Latch
Part Number: 68366543AE
$57.49 MSRP: $85.25
You Save: $27.76 (33%)
ADD TO CART
Product Specifications
- Other Name: LATCH-REAR DOOR; Latch, Lock Actuator
- Position: Driver Side
- Replaced by: 68366543AF
- Replaces: 68366543AD, 68366543AC, 68366543AB, 68366543AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Rear Door Latch
Part Number: 68366542AE
$57.49 MSRP: $85.25
You Save: $27.76 (33%)
ADD TO CART
Product Specifications
- Other Name: LATCH-REAR DOOR; Latch, Lock Actuator
- Position: Passenger Side
- Replaced by: 68366542AF
- Replaces: 68366542AA, 68366542AB, 68366542AD, 68366542AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Front Door
Part Number: 68367059AC
$56.04 MSRP: $80.25
You Save: $24.21 (31%)
ADD TO CART
Product Specifications
- Other Name: Latch
- Position: Driver Side
- Replaced by: 68367059AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2024 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Bracket-Multifunction
Part Number: 68565750AA
$22.48 MSRP: $32.20
You Save: $9.72 (31%)
ADD TO CART
Product Specifications
- Other Name: Tensioner
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Front Door
Part Number: 68366541AC
$51.32 MSRP: $73.50
You Save: $22.18 (31%)
ADD TO CART
Product Specifications
- Other Name: Latch
- Position: Driver Side
- Replaces: 68366541AA, 68366541AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022 Jeep Wagoneer | 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Front Door Latch
Part Number: 68367059AE
$56.04 MSRP: $80.25
You Save: $24.21 (31%)
ADD TO CART
Product Specifications
- Other Name: LATCH-FRONT DOOR; Latch
- Position: Driver Side
- Replaced by: 68367059AF
- Replaces: 68367059AD, 68367059AA, 68367059AB, 68367059AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2025 Jeep Wagoneer | 6 Cyl 3.0 L GAS
View related parts
Jeep Wagoneer Liftgate
Part Number: 68364385AE
$102.65 MSRP: $152.00
You Save: $49.35 (33%)
Product Specifications
- Other Name: Latch, Lock, Lock Actuator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Drivers Left Front Door Lock Actuator
Part Number: 55000767
Product Specifications
- Other Name: Latch-Door-Lh ; Latch, Front Door, Right; Lock
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.0L, 6 Cyl 4.2L
View related parts
Jeep Wagoneer Bracket-Multifunction
Part Number: 68565751AA
$21.38 MSRP: $30.60
You Save: $9.22 (31%)
Product Specifications
- Other Name: Tensioner
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)

Jeep Wagoneer Door Latch Assembly

The Door Latch Assembly plays an important role in guaranteeing the safety of Jeep Wagoneer automobiles by locking the doors so that no one could open the car doors from the outer side. This assembly can feature different forms of operations that can be either a mechanical or an electrical kind for the locking and unlocking of the door. There have been various types of the Door Latch Assembly used in Jeep Wagoneer models in the different years with an aim of using reliable designs that could be easily operated. Some of the signs that may warrant the replacement of the Door Latch Assembly include faulty outer door handle, a sticking latch or problems with the door lock button.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wagoneer Door Latch Assembly at great affordable prices. Moreover, all genuine Jeep Wagoneer Door Latch Assembly come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Wagoneer Door Latch Assembly Parts Questions & Experts Answers

Drivers Left Front Door Lock Actuator
55000767
Q: How to remove and install the door handle, door latch assembly, and door lock cylinder on a Jeep Wagoneer?
A:
Remove the door trim panel and water shield. Remove the door window glass. Remove the access plug in the end of the door. Remove the three door latch retaining screws from the end of the door, disconnect the links, then remove the latch and solenoid. On power door locks, it will be necessary to drill out the rivets retaining the solenoid to the door. Installation is the reverse of removal. Tighten the door latch retaining screws securely. Disconnect the link from the lock cylinder. Use pliers to slide the retaining clip off and remove the lock cylinder from the door. Installation is the reverse of removal. After installation, check the latch link free play by pressing the door handle release button in. Check that the latch link starts to move after the button moves about 1/64-inch. If necessary, loosen the adjusting screw on the latch, adjust the free play and then retighten it. Remove the retaining nuts, pull the handle out, detach the control rod and remove the handle from the door. Installation is the reverse of removal. Tighten the retaining nuts securely.