Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Chrysler 53021608DE Cylinder Head

2011-2012 Chrysler 300 53021608DE

Customer Questions & Expert Answers (9)
53021608DE Mopar Cylinder Head Illustration 1 of 1
53021608DE Mopar Cylinder Head Illustration 1 of 1
  • Part Description
    Head Cylinder Right
  • Replaced By
    53021608DF
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • 53021608DE Cylinder Head is Ref No. 3 in the diagram below

    2014 Dodge Charger Cylinder Head Diagram for 53021608DE
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number53021608DE
    Part DescriptionHead Cylinder Right
    Item Dimensions24.3 x 12.0 x 9.3 inches
    Item Weight34.10 Pounds
    ConditionNew
    ManufacturerMopar
    SKU53021608DE
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2012 Chrysler 3008 Cyl 5.7LC AWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, S V8 AWD, S V8 RWD

  • Customer Questions & Expert Answers

    Q:
    Please cross check for fit. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 53021608DE fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    What is the first step to remove the Cylinder Head components for the 2011 Dodge Challenger? Posted by Customer
    A:
    First, disconnect the cable from the negative terminal of the battery, ensuring to disconnect the Intelligent Battery Sensor connector first on 2015 and later models.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the recommended procedure for tightening the Cylinder Head bolts for the 2012 Dodge Challenger? Posted by Customer
    A:
    Tighten the head bolts in the recommended sequence to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the installation process for the Cylinder Head on the 2012 Jeep Grand Cherokee? Posted by Customer
    A:
    Ensure the mating surfaces of the cylinder head and engine block are clean, using a gasket scraper and brake cleaner as needed.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the exhaust pipes and Cylinder Head for the 2011 Jeep Grand Cherokee? Posted by Customer
    A:
    Unbolt the exhaust pipes from the manifolds.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the Cylinder Head be reinstalled for the 2011 Ram 1500? Posted by Customer
    A:
    For installation, position the new head gasket over the dowels in the block, place the cylinder head over it without disturbing the gasket, and apply engine oil to the head bolt threads and underneath the bolt heads. Install the bolts in their original locations and tighten them to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the Cylinder Head bolts be installed for the 2014 Ram 2500? Posted by Customer
    A:
    When installing head bolts, applying clean engine oil to M10 bolt threads and hardened washers (if equipped), with the chamfered side of the washers facing the bolt heads, is recommended. For M8 head bolts, thread sealant should be applied to the bolt threads.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be removed from the Cylinder Head for the 2011 Ram 1500? Posted by Customer
    A:
    All additional components attached to the cylinder head, such as coolant fittings, ground straps, cables, hoses, wires, or brackets, should be labeled and removed.
    Posted by MoparPartsGiant Specialist
    Q:
    What surfaces, including the Cylinder Head, should be checked for warpage for the 2012 Ram 3500? Posted by Customer
    A:
    Warpage of the cylinder head, as well as the head gasket, intake, and exhaust manifold surfaces, should be checked with consultation from an automotive machine shop.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 53021608DE, the Right Choice

To ensure reliability, purchase Mopar part # 53021608DE Cylinder Head. It is sometimes referred to as Cylinder Head. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler 300 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 53021608DE Cylinder Head. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly