Jeep 5183566AA Transmission Oil Cooler

To remove the oil cooler you merely unscrew the connection that is attached to the negative terminal of the battery and pump out the coolant. Lift the car and place jack stands securely on the beneath the car to prevent from rolling. Then, detach the oil filter and the oil from the engine, later, and finally, cut the rubber hoses connected to the inlet and outlet ports of the engine. Locate the oil cooler connector bolt that is present at the centre of the cooler and then take out the oil cooler and dispose the oil cooler O-ring. For installation, it is required to lubricate an oil cooler connector bolt and the O-ring with clean engine oil. Align the flatted portion of the oil cooler to the adapter and screw the component on the adapter using the connector bolt to the specified degree of turn. Replace the oil filter with a new one and replace the oil in the engine, replacing the coolant in the radiator. Each engine should be run until it warms to normal and checked for leaks.