Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Jeep 53021941AB Cylinder Head

2007-2010 Jeep 53021941AB

Customer Questions & Expert Answers (8)
53021941AB Mopar Cylinder Head Illustration 1 of 1
53021941AB Mopar Cylinder Head Illustration 1 of 1
  • Part Description
    Head Cylinder Left See Note
  • Replaced By
    68236143AA
  • Manufacturer
    Mopar
Make sure this part fits
$1032.58 MSRP: $1235.00
You Save: $202.42 (17%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • 53021941AB Cylinder Head is Ref No. 3 in the diagram below

    2008 Jeep Commander Cylinder Head Diagram for 53021941AB
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number53021941AB
    Part DescriptionHead Cylinder Left See Note
    Item Dimensions12.5 x 12.7 x 9.3 inches
    Item Weight30.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU53021941AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2009 Jeep Commander6 Cyl 3.7LSport 2WD, Sport 4WD
    2008-2010 Jeep Grand Cherokee6 Cyl 3.7LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD
    2007-2009 Jeep Liberty6 Cyl 3.7LLimited Edition 2WD, Limited Edition 4WD, Sport 2WD, Sport 4WD

  • Customer Questions & Expert Answers

    Q:
    Please cross check for fit. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 53021941AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    What is the process for installing the head bolts on the Cylinder Head for the 2008 Dodge Dakota? Posted by Customer
    A:
    Install the bolts in their original locations, tightening them finger tight before following the proper sequence for torque and angle of rotation.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the head bolts be loosened for the Cylinder Head of the 2008 Dodge Durango? Posted by Customer
    A:
    Loosen the head bolts in 1/4-turn increments in a pattern opposite of the tightening sequence until they can be removed by hand, noting that different-length head bolts should be stored in order.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for removing the timing belt and accessing the Cylinder Head for the 2009 Dodge Nitro? Posted by Customer
    A:
    Remove the timing belt covers, rotate the engine to TDC, verify the timing marks are aligned, and then remove the timing belt.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the exhaust pipes and the Cylinder Head for the 2008 Dodge Nitro? Posted by Customer
    A:
    Unbolt the exhaust pipes from the exhaust manifolds.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the remaining steps to complete the installation of the Cylinder Head for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Complete the remaining installation steps in reverse order. Finally, add coolant, change the engine oil and filter, and start the engine to check for proper operation and leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the Cylinder Head bolt holes for the 2008 Jeep Grand Cherokee? Posted by Customer
    A:
    Chase the threads in the head bolt holes with a tap and clean with compressed air, wearing eye protection.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after reassembling the engine and installing the Cylinder Head for the 2007 Jeep Liberty? Posted by Customer
    A:
    Refill the cooling system and change the engine oil and filter.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 53021941AB, the Right Choice

To ensure reliability, purchase Mopar part # 53021941AB Cylinder Head. It is sometimes referred to as Cylinder Head. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Jeep Commander, Grand Cherokee, and Liberty models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 53021941AB Cylinder Head. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly