Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Jeep R5637078 Cylinder Head

2007-2010 Jeep R5637078

Customer Questions & Expert Answers (8)
R5637078 Mopar Cylinder Head Product Photo 1 of 1
R5637078 Mopar Cylinder Head Product Photo 1 of 1
  • Part Description
    Head Cylinder Left See Note
  • Replaced By
    R5637078AB
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • 2007 Jeep Grand Cherokee Cylinder Head Diagram for R5637078
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part NumberR5637078
    Part DescriptionHead Cylinder Left See Note
    Item Dimensions12.9 x 12.5 x 9.2 inches
    Item Weight32.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKUR5637078
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2009 Jeep Commander6 Cyl 3.7LSport 2WD, Sport 4WD
    2007-2010 Jeep Grand Cherokee6 Cyl 3.7LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD
    2007-2009 Jeep Liberty6 Cyl 3.7LLimited Edition 2WD, Limited Edition 4WD, Sport 2WD, Sport 4WD

  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if R5637078 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    What is the procedure for placing the Cylinder Heads on the block for the 2008 Dodge Durango? Posted by Customer
    A:
    Carefully place the heads on the block without disturbing the gaskets, coat the head bolt threads with engine oil, and install the bolts in their original locations, tightening them finger tight before following the recommended sequence to torque them.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the next step after removing the Cylinder Head for the 2008 Dodge Dakota? Posted by Customer
    A:
    Remove all external components from the head for thorough cleaning and inspection.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the head bolt holes be prepared for the Cylinder Head of the 2009 Dodge Nitro? Posted by Customer
    A:
    Use a tap of the correct size to chase the threads in the head bolt holes, then clean the holes with compressed air.
    Posted by MoparPartsGiant Specialist
    Q:
    How are the head bolts dealt with in preparation for Cylinder Head removal for the 2009 Dodge Ram 1500? Posted by Customer
    A:
    Loosen the head bolts in increments and remove them by hand.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if resistance is felt when lifting the Cylinder Head for the 2007 Dodge Nitro? Posted by Customer
    A:
    If resistance is felt, dislodge the cylinder head by striking it with a wood block and hammer, being cautious not to damage the cylinder head or block.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the final step after completing the procedure for the Cylinder Head on the 2008 Jeep Grand Cherokee? Posted by Customer
    A:
    Start the engine and check for oil and coolant leaks.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be removed after the intake manifold and before the Cylinder Head for the 2008 Jeep Liberty? Posted by Customer
    A:
    Remove the spark plug wires, spark plugs, and ignition coil, followed by the upper radiator and heater hoses, and the heater tube support bracket.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part R5637078, the Right Choice

To ensure reliability, purchase Mopar part # R5637078 Cylinder Head. It is sometimes referred to as Cylinder Head. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Jeep Commander, Grand Cherokee, and Liberty models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as R5637078 Cylinder Head. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly