Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Jeep R6637056 Cylinder Head

2005-2012 Jeep R6637056

Customer Questions & Expert Answers (8)
R6637056 Mopar Cylinder Head Illustration 1 of 1
R6637056 Mopar Cylinder Head Illustration 1 of 1
  • Part Description
    Head Cylinder Right See Note
  • Replaced By
    R6637056AB
  • Manufacturer
    Mopar
Make sure this part fits
$1041.62 MSRP: $1235.00
You Save: $193.38 (16%)
Core Charge: $150.00
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • R6637056 Cylinder Head is Ref No. 3 in the diagram below

    2005 Jeep Grand Cherokee Cylinder Head Diagram for R6637056
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part NumberR6637056
    Part DescriptionHead Cylinder Right See Note
    Item Dimensions25.3 x 13.1 x 9.5 inches
    Item Weight32.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKUR6637056
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2006-2010 Jeep Commander6 Cyl 3.7LBase 2WD, Base 4WD, Limited 2WD, Limited 4WD, Sport 2WD, Sport 4WD
    2005-2010 Jeep Grand Cherokee6 Cyl 3.7LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD
    2005-2012 Jeep Liberty6 Cyl 3.7LLimited Edition 2WD, Limited Edition 4WD, Limited JET Edition 2WD, Limited JET Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD

  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if R6637056 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    What should be done with the Cylinder Head bolt holes for the 2005 Dodge Dakota? Posted by Customer
    A:
    Chase the threads in the head bolt holes with a tap and clean with compressed air.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for placing the Cylinder Heads on the block for the 2006 Dodge Durango? Posted by Customer
    A:
    Carefully place the heads on the block without disturbing the gaskets, coat the head bolt threads with engine oil, and install the bolts in their original locations, tightening them finger tight before following the recommended sequence to torque them.
    Posted by MoparPartsGiant Specialist
    Q:
    How are the head bolts dealt with in preparation for Cylinder Head removal for the 2010 Dodge Ram 1500? Posted by Customer
    A:
    Loosen the head bolts in increments and remove them by hand.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be inspected on the Cylinder Head for the 2010 Dodge Nitro? Posted by Customer
    A:
    Check the cylinder head for warpage and inspect the head gasket, intake, and exhaust manifold surfaces.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you remove the camshaft from the Cylinder Head of the 2010 Dodge Nitro? Posted by Customer
    A:
    Remove the camshaft thrust plate fasteners and the thrust plate, then carefully slide the camshaft out of the cylinder and remove the rear timing cover-to-cylinder head bolts.
    Posted by MoparPartsGiant Specialist
    Q:
    What components should be installed after the Cylinder Head for the 2010 Jeep Grand Cherokee? Posted by Customer
    A:
    Install the timing chain guides, timing chains, and timing chain sprockets.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you detach the power steering pump from the Cylinder Head for the 2012 Jeep Liberty? Posted by Customer
    A:
    Detach the power steering pump bolts from the engine while leaving the hoses attached, then set the pump aside and remove the accessory bracket(s).
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part R6637056, the Right Choice

To ensure reliability, purchase Mopar part # R6637056 Cylinder Head. It is sometimes referred to as Cylinder Head. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Jeep Commander, Grand Cherokee, and Liberty models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as R6637056 Cylinder Head. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly