Make sure this part fits

Jeep 53021720AB Tappet

2006-2008 Jeep Grand Cherokee 53021720AB

Customer Questions & Expert Answers (2)
53021720AB Mopar Tappet Product Photo 1 of 1
  • Part Description
    Lifter And Yoke Hydraulic Engine
  • Replaced By
    5038784AD
  • Manufacturer
    Mopar
Make sure this part fits
$168.75 MSRP: $250.00
You Save: $81.25 (33%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number53021720AB
    Part DescriptionTappet; Lifter And Yoke Hydraulic Engine
    Item Dimensions4.1 x 3.9 x 7.8 inches
    Item Weight1.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity4
    ManufacturerMopar
    SKU53021720AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2006-2008 Jeep Grand Cherokee8 Cyl 6.1LLaredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, SRT8 4WD
  • Customer Questions & Expert Answers

    Q:
    Please cross check for fit.
    A:
    You can Select Your Vehicle to check if 53021720AB fits your vehicle.
    Posted and answered by Mopar Parts Specialist Cristian
    Q:
    How to remove and inspect rocker arms and Lash Adjusters in 2.7L V6 engine on Dodge Magnum? Posted by Jaydin S.
    A:
    A universal shaft-type valve spring compressor will be required for this procedure. The only other alternative to accomplishing this task without the use of this special tool is to remove the liming chains and the camshafts which requires major disassembly of the engine and surrounding components. Before beginning this procedure, be sure to place the transmission in Neutral and apply the parking brake or block the rear wheels. Also, disable the ignition system by disconnecting the primary electrical connectors at the ignition coils and remove the spark plugs. Remove the upper intake manifold and the valve cover(s). Rotate the engine with a socket and ratchet attached to the crankshaft pulley bolt until the cam lobe for the rocker arm to be removed is located on its base circle. Turn the crankshaft in a clockwise direction. Before the rocker arms and lash adjusters are removed, arrange to label and store them, so they can be kept separate and reinstalled on the same valve they were removed from. Mount the valve spring compressor on the cylinder head. Depress the valve spring just enough to release tension on the rocker arm to be removed. Once tension on the rocker arm is relieved, the rocker arm can be removed by simply pulling it out. If you're replacing or removing all of the rockers arms or lash adjusters, begin with cylinder number one and work on the rocker arms for one cylinder at a time. Move from cylinder-to-cylinder following the firing order sequence. Remember to keep the rocker arm and lash adjuster for each valve together so they can be reinstalled in the same locations. Once the rocker arms are removed, the lash adjusters can be pulled out of the cylinder head and stored with the corresponding rocker arm. Inspect each rocker arm for wear, cracks and other damage. Make sure the rollers turn freely and show no signs of wear, also check the pivot area for wear, cracks and galling. Inspect the lash adjuster contact surfaces wear or damage. Make sure the lash adjusters move up and down freely in their bores on the cylinder head without excessive side to side play. Installation is the reverse of removal with the following exceptions: Always install the lash adjuster first and make sure they're at least partially full of oil before installation. This is indicated by little or no lash adjuster plunger travel.
    You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Giovanni / Sep 02, 2023

Genuine Mopar Part 53021720AB, the Right Choice

To ensure reliability, purchase Mopar part # 53021720AB Tappet. It is sometimes referred to as Lash Adjuster. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Jeep Grand Cherokee models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 53021720AB Tappet. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.
Shop MoparPartsGiant.com for dedicated service, prompt delivery, and low prices on genuine parts from real OE dealerships.