Mopar 52113278AA Rear Upper Control Arm

Service operations on the rear control arms of Durango models start by elevating the rear part and securely placing jackstands under it. The servicing process starts by disconnecting first the fasteners at the axle then moving to the fasteners at the frame to remove the upper control arm. The first step for the lower control arm involves removing the parking brake cable bracket from the left arm before removing fasteners at the axle and frame to extract the arm. All rubber bushings need inspection to check for any signs of wear or damage. Cracked and torn parts must be replaced. The reinstall process happens in the opposite direction of disassembly while following the set torque values for each fastener but these should remain untightened until the vehicle reaches its normal height.