Mopar 4765019AB Transmission Gearshift Control Cable

Raise the hood and protect the left fender with a blanket. Disconnect the negative cable from the remote battery terminal. Remove the air cleaner assembly. Disconnect the positive cable. Remove the Transmission Control Module. Position the Power Distribution Center out of the way. Carefully pry the shift cable from the manual lever on the transaxle using two flat blade screwdrivers. Remove the bolt securing the shift cable bracket and detach the cable. Inside the vehicle, remove the center console. Pry the shift cable from the gearshift lever pin and remove the shift cable retaining clip. Raise the vehicle securely on jackstands. Remove the shift cable grommet from the floorpan and carefully extract the shift cable assembly.

Disconnect both cables at the transaxle and operate the shifter. If the shift lever moves smoothly through all positions with the cables disconnected, adjust the crossover cable as needed.