Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Mopar 4792063AB Engine Intake Camshaft

2009-2010 Mopar 4792063AB

Customer Questions & Expert Answers (8)
4792063AB Mopar Engine Intake Camshaft Product Photo 1 of 1
4792063AB Mopar Engine Intake Camshaft Product Photo 1 of 1
4792063AB Mopar Engine Intake Camshaft Illustration 1 of 1
  • Part Description
    Camshaft-Intake
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • 4792063AB Engine Intake Camshaft is Ref No. 3 in the diagram below

    2009 Chrysler 300 Engine Intake Camshaft Diagram for 4792063AB
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4792063AB
    Part DescriptionCamshaft-Intake
    Other NamesCamshaft
    Item Dimensions25.2 x 6.3 x 6.3 inches
    Item Weight6.10 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4792063AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2010 Chrysler 3006 Cyl 2.7LC AWD, C RWD, LX RWD, Touring RWD
    2009-2010 Chrysler Sebring6 Cyl 2.7LLimited Sedan, LX Sedan, Touring Convertible, Touring Sedan
    2009-2010 Dodge Avenger6 Cyl 2.7LExpress, Heat, R/T FWD, SE, SXT
    2009-2010 Dodge Charger6 Cyl 2.7LBase RWD, R/T AWD, R/T RWD
    2009-2010 Dodge Journey6 Cyl 2.7LSE FWD, SXT FWD

  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4792063AB fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    Under what conditions can the Camshaft be reused for the 2009 Chrysler 300? Posted by Customer
    A:
    If the lobes are in good condition and the lobe lift variation measurements are within limits, the camshaft can be reused.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing the secondary timing chain and Camshaft sprockets for the 2009 Chrysler 300? Posted by Customer
    A:
    For installation, place the secondary timing chain over the camshaft sprockets while aligning colored links with the marks on the sprockets. Use a U-shaped tool to lock the secondary tensioner in a compressed position.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after removing the valve cover for the 2009 Chrysler Sebring? Posted by Customer
    A:
    After removing the valve cover, the timing belt should be taken off.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be detached after loosening the bearing caps for the Camshaft in the 2010 Chrysler Sebring? Posted by Customer
    A:
    Detach the bearing caps and remove the camshafts, secondary timing chain, and secondary tensioner as an assembly from the cylinder head, noting the differences between intake and exhaust camshafts.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be inspected during the procedure for the Camshaft of the 2010 Chrysler Sebring? Posted by Customer
    A:
    Mark and remove the rocker arms and hydraulic lash adjusters, then inspect the camshaft bearing surfaces and lobes for damage, ensuring to replace any defective parts.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done with the lifters and Camshaft for the 2010 Dodge Avenger? Posted by Customer
    A:
    Mark the lifters for proper reinstallation and remove them from the cylinder head.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for installing the secondary timing chain and Camshaft sprockets for the 2010 Dodge Charger? Posted by Customer
    A:
    For installation, place the secondary timing chain over the camshaft sprockets while aligning colored links with the marks on the sprockets. Use a U-shaped tool to lock the secondary tensioner in a compressed position.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 4792063AB, the Right Choice

To ensure reliability, purchase Mopar part # 4792063AB Engine Intake Camshaft. It is sometimes referred to as Camshaft. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler 300 and Sebring models. It fits Dodge Avenger, Charger, Journey.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 4792063AB Engine Intake Camshaft. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly