Mopar 68043388AA Radiator Grille

Start by unscrewing and getting rid of any plastic quick-release rivets holding the top grille to the front bumper cover. With a screwdriver or flat plastic trim tool, pop off the grille from its position on the bumper by loosening the retaining tabs, and put it back on the same way. Start by taking off the screws under and in front of the lower grille, then use a flat plastic trim tool to remove the plastic rivets holding the side close-out panels. To take the grille off, put a screwdriver or a moldable flat tool under each retaining tab, and use force to split the tabs so you can detach the grille from the bumper. Reassembly happens in the opposite order.