Remove the
Bumper cover, then take out the fasteners securing the grille to the bumper cover and separate the grille from it. Installation is the reverse of removal. For Challenger models, if present, remove any plastic rivets retaining the top of the grille to the bumper cover. Using a screwdriver or a flat plastic trim tool, pry the retaining tabs free and separate the grille from the bumper cover, with installation being the reverse of removal. For the lower grille, remove the screws from the underside and the front of the grille, detach the plastic rivets and close out panels from each side of the grille, then use a screwdriver or a flat plastic trim tool to pry the retaining tabs free and separate the grille from the bumper cover, with installation again being the reverse of removal.