My Garage
My Account
Cart
Genuine Dodge Challenger Hood Cable
Hood Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Hood Cables found
Dodge Challenger Cable-Hood Latch
Part Number: 68185113AC$177.75 MSRP: $265.00You Save: $87.25 (33%)
Dodge Challenger Cable-Hood Latch
Part Number: 68185113AB$177.75 MSRP: $265.00You Save: $87.25 (33%)
Dodge Challenger Hood Cable
Hood Cable in Dodge Challenger automobiles performs a simple role of linking a handle within the car's interior to the lock mechanism which is contained in the bonnet so that it can be opened easily to allow for the checking and service of the engine. This cable is normally of steel, which makes this cable strong and durable but like any other material used develop some mechanical draw back like develop crack or rust etc. Some of the most used Hood Cable in Dodge Challenger over the years include, it is however hard to pinpoint the differences between the various types of this Hood Cable. Regardless of the style, the primary goal remains the same: to make certain the the hood can be opened quickly in the event the need arise, and at the same time, safely. Thus, proper servicing and appropriate change of the Hood Cable are extraordinarily important to the further performance of the Dodge Challenger.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger Hood Cable at great affordable prices. Moreover, all genuine Dodge Challenger Hood Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Challenger Hood Cable Parts Questions & Experts Answers
- Q: How do you replace the hood latch and cable on Dodge Challenger?A:To remove the latch, draw a line around it for the purpose of affixation upon reassembly, and next to it remove the bolts which hold the latch with the radiator support as well as the latch itself. At times, remove the Hood release cable from the rear of the latch bracket and when fitting, get the latch fine tuned to get the hood to shut with the Bumpers just slightly squashed. To replace the cable begin by getting rid of the hood latch and pulling the cable off the latch area. Third, eliminate the left side headlight housing and then connect a piece of wire to the end of the cable situated in the engine compartment so as to facilitate the pulling of the new cable. Remove the cable from all the hooks and clips in the compartment and if needed trim some of the clips. The hood release handle can be removed by unscrewing the ones located underneath the instrument panel; to do this, the end of the cable has to be placed into the opening of the latch handle to pull it out. Remove the grommet and pass the cable through the firewall into the cab; then strip off the wire from the old cable and connect it to the new one and make sure that the new cable has a grommet. Pass the new cable through the firewall into the engine compartment and install the grommet and finish the work by unbolting the above mentioned parts in the reverse manner.
