How to remove the front and rear bumper covers on Dodge Challenger?

Bumpers on all models consist of a plastic fascia, or bumper cover, fascia support, and a structural beam. To remove the front bumper cover, raise the vehicle and support it securely on jackstands. In the wheelwell, remove the fasteners securing the ends of the bumper cover to the inner fender splash shield; note that some models may have rivets instead of plastic retaining pins, and replacement plastic push-pin fasteners are available at most auto parts stores. Next, remove the engine splash shield by taking out the fasteners. Continue in the wheelwell by removing the fasteners that secure the bumper cover to the fender and bumper cover support, noting that the Challenger model has fasteners in a slightly different location. After that, remove the close-out panel above the radiator support, then take out the upper mounting fasteners and the bumper cover itself. Disconnect the fog lamps, if equipped, and carefully remove the bumper cover from the vehicle, also disconnecting the Tire Pressure Monitor connector. For the rear bumper cover, raise the vehicle and support it securely on jackstands, then remove the fasteners that secure the inner-fender splash shield to the rear bumper cover, keeping in mind that some models may have rivets that need to be drilled out. Challenger models require the removal of the rear tail light assemblies. In the rear wheelwell, remove the fasteners securing the bumper cover to the rear quarter panel, followed by the fasteners from the lower part of the rear bumper fascia. Finally, remove the remaining bumper cover mounting fasteners and take off the bumper cover. Installation is the reverse of removal.

Genuine Dodge Challenger Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

24 Bumpers found

View related parts
Dodge Challenger Rear Bumper Cover Lower
Part Number: 68260010AC
$231.46 MSRP: $407.00
You Save: $175.54 (44%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower; Lower Cover
- Position: Rear Lower
- Replaces: 68260010AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SXT, SXT Plus, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Bumper Cover Lower
Part Number: 68048308AA
$76.24 MSRP: $132.00
You Save: $55.76 (43%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower; Lower Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Challenger Rear Bumper Cover Lower
Part Number: 68260010AB
$231.46 MSRP: $407.00
You Save: $175.54 (44%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower
- Position: Rear Lower
- Replaced by: 68260010AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Dodge Challenger | R/T, R/T Scat Pack, SRT 392, SRT Hellcat, SXT, SXT Plus | 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Bumper Cover
Part Number: 68259761AC
$514.70 MSRP: $778.00
You Save: $263.30 (34%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear; Bumper Cover
- Position: Rear
- Replaces: 68259761AA, 68259761AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2020 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Bumper Cover
Part Number: 68259761AB
$514.70 MSRP: $778.00
You Save: $263.30 (34%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear
- Replaced by: 68259761AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016 Dodge Challenger | R/T, R/T Scat Pack, SRT 392, SRT Hellcat, SXT | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Bumper Cover
Part Number: 68259761AA
$514.70 MSRP: $778.00
You Save: $263.30 (34%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear
- Position: Rear
- Replaced by: 68259761AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Dodge Challenger | R/T Scat Pack, SRT 392, SRT Hellcat, SXT, SXT Plus | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Front Bumper Cover
Part Number: 68258730AB
$512.82 MSRP: $748.00
You Save: $235.18 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Primed; Bumper Cover
- Replaces: 68258730AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Front Bumper Cover
Part Number: 68109836AB
$507.30 MSRP: $743.00
You Save: $235.70 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Primed; Bumper Cover
- Position: Front
- Replaces: 68109836AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Challenger | R/T, SE, SRT, SRT Core, SRT8, SRT8 Core | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Challenger Front Bumper Cover
Part Number: 68258731AC
$836.91
ADD TO CART
Product Specifications
- Other Name: Fascia Front Primed; Bumper Cover
- Replaces: 68258731AA, 68258731AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | SRT Hellcat, SRT Hellcat RWD | 8 Cyl 6.2 L GAS, 8 Cyl 6.2L
View related parts
Dodge Challenger Front Bumper Cover
Part Number: 68043387AA
$916.43 MSRP: $1365.00
You Save: $448.57 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Primed
- Replaced by: 68043387AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | R/T, SE, SRT8 | 6 Cyl 3.5L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Dodge Challenger Rear Bumper Cover
Part Number: 68371814AA
$712.87 MSRP: $1055.00
You Save: $342.13 (33%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2021 Dodge Challenger | GT AWD, GT RWD, R/T RWD, R/T Scat Pack RWD, SRT Demon RWD, SRT Hellcat RWD, SXT AWD, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Bumper Cover Lower
Part Number: 68260009AC
$343.54
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower; Lower Cover
- Replaces: 68260009AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SXT, SXT Plus, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Front Bumper Cover
Part Number: 68258731AB
$475.20 MSRP: $691.00
You Save: $215.80 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Primed
- Position: Front
- Replaced by: 68258731AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Dodge Challenger | SRT Hellcat | 8 Cyl 6.2L
View related parts
Dodge Challenger Rear Bumper Cover
Part Number: 68371809AA
$654.18 MSRP: $954.00
You Save: $299.82 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Challenger | GT AWD, GT RWD, R/T 392 RWD, R/T RWD, R/T Scat Pack RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD, SXT AWD, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Bumper Cover Lower
Part Number: 68260008AB
$257.13 MSRP: $405.00
You Save: $147.87 (37%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Rear Lower; Lower Cover
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Hellcat RWD, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L
View related parts
Dodge Challenger Rear Bumper Cover
Part Number: 68144509AA
$519.84 MSRP: $761.00
You Save: $241.16 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA-Rear; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Dodge Challenger | R/T, SE, SRT, SRT Core, SRT8, SRT8 Core | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Dodge Challenger Front Bumper Cover
Part Number: 68371805AA
$499.14 MSRP: $728.00
You Save: $228.86 (32%)
Product Specifications
- Other Name: Fascia-Front; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Challenger | GT AWD, GT RWD, R/T 392 RWD, R/T RWD, R/T Scat Pack RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD, SXT AWD, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Bumper Cover Lower
Part Number: 68039501AB
$189.50 MSRP: $280.00
You Save: $90.50 (33%)
Product Specifications
- Other Name: Fascia-Rear Lower; Lower Cover
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2014 Dodge Challenger | R/T, SE, SRT, SRT Core, SRT8, SRT8 Core | 6 Cyl 3.5L, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.4L
View related parts
Dodge Challenger Rear Fascia
Part Number: 68532761AA
$511.68 MSRP: $746.00
You Save: $234.32 (32%)
Product Specifications
- Other Name: FASCIA-REAR; Bumper Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Dodge Challenger | 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Rear Bumper Cover Lower
Part Number: 68260007AB
$272.98 MSRP: $405.00
You Save: $132.02 (33%)
Product Specifications
- Other Name: Fascia-Rear Lower; Lower Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Hellcat RWD, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L

| Page 1 of 2 |Next >

1-20 of 24 Results

Dodge Challenger Bumper

The Dodge Challenger Bumper delivers critical low speed impact protection by soaking up and spreading collision forces so that sheet metal, lights, and passengers stay safer. Over time, the Bumper on each Dodge Challenger muscle coupe shifted from a simple chrome bar mounted on brackets to a reinforcement beam tucked neatly into the body, skinned in plastic to adhere to style demands and also stricter 5 mph rules. The rugged appearance and limited energy absorption of the early utilitarian designs have evolved considerably. Integrated designs with molded covers are now matched with foam or honeycomb materials for improved energy absorption. The alternatives for materials have also increased. For example, owners can go for aluminum when they want lightness, carbon steel if they prefer brute strength, and stainless steel when they want more corrosion defense. Moreover, the finish can have anything from chrome to paint or a textured coating. Regardless of variations, the essential mission remained the same across every Dodge Challenger, keeping after-accident repair bills low, all while staying a legally required fixture. The Bumper of every Dodge Challenger counts on a modern design with a plastic skin. These days, the Bumper system remains an essential guardian on any Challenger. Additionally, the Bumper is designed to withstand various impacts while maintaining its structural integrity.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger Bumper at great affordable prices. Moreover, all genuine Dodge Challenger Bumper come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Challenger Bumper Parts Questions & Experts Answers

Front Bumper Cover
68109836AB
Q: How to remove the front and rear bumper covers on Dodge Challenger?
A:
Bumpers on all models consist of a plastic fascia, or bumper cover, fascia support, and a structural beam. To remove the front bumper cover, raise the vehicle and support it securely on jackstands. In the wheelwell, remove the fasteners securing the ends of the bumper cover to the inner fender splash shield; note that some models may have rivets instead of plastic retaining pins, and replacement plastic push-pin fasteners are available at most auto parts stores. Next, remove the engine splash shield by taking out the fasteners. Continue in the wheelwell by removing the fasteners that secure the bumper cover to the fender and bumper cover support, noting that the Challenger model has fasteners in a slightly different location. After that, remove the close-out panel above the radiator support, then take out the upper mounting fasteners and the bumper cover itself. Disconnect the fog lamps, if equipped, and carefully remove the bumper cover from the vehicle, also disconnecting the Tire Pressure Monitor connector. For the rear bumper cover, raise the vehicle and support it securely on jackstands, then remove the fasteners that secure the inner-fender splash shield to the rear bumper cover, keeping in mind that some models may have rivets that need to be drilled out. Challenger models require the removal of the rear tail light assemblies. In the rear wheelwell, remove the fasteners securing the bumper cover to the rear quarter panel, followed by the fasteners from the lower part of the rear bumper fascia. Finally, remove the remaining bumper cover mounting fasteners and take off the bumper cover. Installation is the reverse of removal.