Make sure this part fits

Mopar RP90AP4AE Sliding Door Exterior Handle

2004-2005 Mopar RP90AP4AE

Customer Questions & Expert Answers (4)
RP90AP4AE Mopar Sliding Door Exterior Handle Illustration 1 of 1
  • Part Description
    Handle Sliding Door Exterior
  • Position
    Passenger Side
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part NumberRP90AP4AE
    Part DescriptionHandle Sliding Door Exterior
    Other NamesHandle Outside
    Item Dimensions10.8 x 4.0 x 4.0 inches
    Item Weight1.20 Pounds
    PositionPassenger Side
    ConditionNew
    ManufacturerMopar
    SKURP90AP4AE
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2004-2005 Chrysler Town & Country6 Cyl 3.3L, 6 Cyl 3.8LBase, EX, Limited AWD, Limited FWD, LX FWD, LXi FWD, Touring AWD, Touring FWD
    2005 Dodge Caravan4 Cyl 2.4L, 6 Cyl 3.3LC/V, SE, SXT
    2004-2005 Dodge Grand Caravan6 Cyl 3.3L, 6 Cyl 3.8LC/V, ES AWD, ES FWD, EX, SE, SXT FWD
  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if RP90AP4AE fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    What steps are involved in replacing the sliding Door Handle latch/lock control for the 2004 Chrysler Town & Country? Posted by Customer
    A:
    Remove the sliding door trim panel, disconnect the external cable, remove the foam insulation block, take out the inside latch handle, release the clip holding the inside door handle bellcrank link, and remove the bolts securing the latch/lock control to the sliding door.
    Posted by MoparPartsGiant Specialist
    Q:
    After installing the door latch and Door Handle, what should be done next for the 2005 Dodge Caravan? Posted by Customer
    A:
    Insert the linkage into the latch, engage the clips, and reconnect the electrical connector if applicable.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for adjusting the linkage of the Door Handle after installation for the 2005 Dodge Grand Caravan? Posted by Customer
    A:
    Loosen the linkage adjusting screw with a 5/32-inch hex-head wrench through the adjustment hole, then push it up in the slot to remove slack from the linkage before tightening it.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part RP90AP4AE, the Right Choice

To ensure reliability, purchase Mopar part # RP90AP4AE Sliding Door Exterior Handle. It is sometimes referred to as Door Handle. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler Town & Country models. It fits Dodge Caravan, Grand Caravan.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as RP90AP4AE Sliding Door Exterior Handle. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly