Make sure this part fits

Mopar 5183201AC Fuel Pump Module/Level Unit

2010-2011 Mopar 5183201AC

Customer Questions & Expert Answers (5)
5183201AC Mopar Fuel Pump Module/Level Unit Product Photo 1 of 3
  • Part Description
    Module Kit Fuel Pump/Level Unit Package Contain: Fuel Pump Module Sending unit and o-ring
  • Replaced By
    5183201AH
  • Manufacturer
    Mopar
Make sure this part fits
$354.20 MSRP: $543.00
You Save: $188.80 (35%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number5183201AC
    Part DescriptionModule Kit Fuel Pump/Level Unit Package Contain: Fuel Pump Module Sending unit and o-ring
    Item Dimensions14.0 x 11.1 x 7.6 inches
    Item Weight5.20 Pounds
    ConditionNew
    ManufacturerMopar
    SKU5183201AC
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2011 Dodge Caliber4 Cyl 1.8L, 4 Cyl 2.0L, 4 Cyl 2.4LExpress, Heat, Mainstreet, R/T FWD, Rush, SE, SXT, Uptown
    2010-2011 Jeep Compass4 Cyl 2.0L, 4 Cyl 2.4LBase FWD, Limited FWD, Sport FWD
    2010-2011 Jeep Patriot4 Cyl 2.0L, 4 Cyl 2.4LBase FWD, Latitude X FWD, Limited FWD, Sport FWD
  • Customer Questions & Expert Answers

    Q:
    Please cross check for fit. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 5183201AC fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    How do you disconnect the Fuel Level Sensor electrical connector for the 2010 Jeep Patriot? Posted by Customer
    A:
    To disconnect the fuel level sending unit electrical connector, depress the tab and disconnect it from the underside of the fuel pump module. Avoid touching the terminals or the sending unit resistor card, as well as pulling the sending unit by the wires or float arm.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the removal process for the primary Fuel Pump module for the 2010 Jeep Compass? Posted by Customer
    A:
    To begin the removal process, relieve the fuel system pressure and disconnect the battery's negative terminal. Then, disconnect the electrical connector and fuel delivery line quick-connect fitting from the primary module. Before removing the primary fuel pump module, cap the module fuel line fitting and create alignment marks on the assembly and fuel tank for correct realignment during reinstallation. Use a special service tool or a brass drift to loosen the lock ring securing the fuel pump module and lift the assembly carefully from the fuel tank, ensuring the float arm of the fuel level sending unit and fuel pump inlet strainer remain undamaged. Be prepared for fuel spillage from the reservoir when removing the module.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the new Fuel Level Sensor sending unit for the 2010 Jeep Compass? Posted by Customer
    A:
    Using a narrow electrical connector terminal tool, dislodge the sending unit terminals from the connector body, then install the terminals of the new sending unit into the correct positions in the connector. The remaining steps for installation are the reverse of removal.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the removal process for the primary Fuel Pump module for the 2010 Jeep Patriot? Posted by Customer
    A:
    To begin the removal process, relieve the fuel system pressure and disconnect the battery's negative terminal. Then, disconnect the electrical connector and fuel delivery line quick-connect fitting from the primary module. Before removing the primary fuel pump module, cap the module fuel line fitting and create alignment marks on the assembly and fuel tank for correct realignment during reinstallation. Use a special service tool or a brass drift to loosen the lock ring securing the fuel pump module and lift the assembly carefully from the fuel tank, ensuring the float arm of the fuel level sending unit and fuel pump inlet strainer remain undamaged. Be prepared for fuel spillage from the reservoir when removing the module.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 5183201AC, the Right Choice

To ensure reliability, purchase Mopar part # 5183201AC Fuel Pump Module/Level Unit. It is sometimes referred to as Fuel Pump, Fuel Level Sensor, Fuel Sending Unit. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Dodge Caliber models. It fits Jeep Compass, Patriot.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 5183201AC Fuel Pump Module/Level Unit. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly