Your vehicle deserves only genuine OEM Mopar parts and accessories. To ensure reliability, purchase Mopar part # 68102700AA Fuel Pump Module/Level Unit. It is sometimes referred to as Mopar Fuel Pump, Mopar Fuel Level Sensor, Mopar Fuel Sending Unit. Our Mopar parts and accessories are expedited directly from authorized Mopar dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Mopar parts are the best for restoring your vehicle to factory condition performance. This part fits specific Chrysler 300 models. It fits Dodge Challenger, Charger.
Affordable, reliable and built to last, Mopar part # 68102700AA Fuel Pump Module/Level Unit stands out as the smart option. MoparPartsGiant.com is your prime online source with the biggest and best selection of genuine Mopar parts and accessories at giant discounted prices. We have the OEM Mopar parts and accessories you need at the wholesale prices. MoparPartsGiant.com has you covered no matter what type of Mopar vehicle you drive. For detailed Dodge parts information, click here.
Make sure this part fits your vehicle
Mopar 68102700AA Fuel Pump Module/Level Unit
2011-2014 Mopar 68102700AA
- Part DescriptionModule Kit Fuel Pump/Level Unit Kit Contains: Fuel Pump Module Sending Unit And O-Ring
- Replaced By68102700AC
- ManufacturerMopar
$425.22 MSRP: $625.00 1
You Save: $199.78 (32%)
68102700AA Fuel Pump Module/Level Unit is Ref No. 2 in the diagram below
Product Specifications
Brand Genuine Mopar Manufacturer Part Number 68102700AA Part Description Module Kit Fuel Pump/Level Unit Kit Contains: Fuel Pump Module Sending Unit And O-Ring Item Dimensions 7.9 x 11.8 x 15.6 inches Item Weight 3.20 Pounds Condition New Fitment Type Direct Replacement Manufacturer Mopar SKU 68102700AA Warranty This genuine Mopar part is guaranteed by Mopar's factory warranty. Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65Vehicle Fitment
Year Make Model Engine Important vehicle option details 2011-2014 Chrysler 300 6 Cyl 3.6L, 8 Cyl 5.7L Base AWD, Base RWD, C AWD, C John Varvatos AWD, C John Varvatos RWD, C Luxury Series AWD, C Luxury Series RWD, C RWD, Limited AWD, Limited RWD, S AWD, S Luxury Series RWD, S RWD, S V6 AWD, S V6 RWD, S V8 AWD, S V8 RWD 2011-2014 Dodge Challenger 6 Cyl 3.6L, 8 Cyl 5.7L R/T, SE, SRT, SRT Core, SRT8, SRT8 Core 2011-2014 Dodge Charger 6 Cyl 3.6L, 8 Cyl 5.7L Police AWD, Police RWD, R/T AWD, R/T RWD, SE AWD, SE RWD, SXT AWD, SXT RWD, V6 AWD
Customer Questions & Answers
- Q:Does this part fit my vehicle? Posted by MoparPartsGiant Specialist
- A:You can Select Your Vehicle to check if 68102700AA fits your vehicle.Posted by MoparPartsGiant Specialist
- Q:How do you replace the left fuel level sensor and fuel pump module for the 2010 Dodge Challenger? Posted by Customer
- A:Start by removing the module. Carefully cut the wiring harness clip and disengage the fuel level sensor wires from the clip. Then, loosen the two retaining clips and pull the fuel level sensor out of the fuel pump module. After installation, turn the ignition switch to On to activate the fuel pump and build up fuel pressure in the fuel lines.Posted by MoparPartsGiant Specialist
- See expert answers on similar Fuel Level Sensor
- Q:What must be done to remove the fuel pump/fuel level sensor module for the 2012 Dodge Challenger? Posted by Customer
- A:To remove the fuel pump/fuel level sensor module, the fuel system pressure must be relieved, the negative battery terminal cable must be disconnected, and the fuel tank must be drained to under 5/8-full. The rear seat cushion is removed, and the foam pad covering the module is pulled back. The plastic access cover is carefully lifted off, and the electrical connector is disconnected. The area surrounding the mounting flange is cleaned, and the lock-ring is loosened and unscrewed. The module is lifted up, and the electrical connectors and fuel supply line fitting are disconnected. The residual fuel is drained, and the module is carefully removed from the fuel tank.Posted by MoparPartsGiant Specialist
- See expert answers on similar Fuel Pump
- Q:How do you replace the left fuel level sensor and fuel pump module for the 2012 Dodge Challenger? Posted by Customer
- A:Start by removing the module. Carefully cut the wiring harness clip and disengage the fuel level sensor wires from the clip. Then, loosen the two retaining clips and pull the fuel level sensor out of the fuel pump module. After installation, turn the ignition switch to On to activate the fuel pump and build up fuel pressure in the fuel lines.Posted by MoparPartsGiant Specialist
- See expert answers on similar Fuel Pump
- Q:Where is the auxiliary fuel pump module located for the 2009 Dodge Challenger? Posted by Customer
- A:The auxiliary fuel pump module is located in the right side of the fuel tank and includes the main fuel filter and fuel pressure regulator.Posted by MoparPartsGiant Specialist
- See expert answers on similar Fuel Level Sensor
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
Genuine Mopar Part 68102700AA, the Right Choice
Why choose Mopar Parts Giant
- Dedicated Service
Your complete satisfaction is our #1 goal
- Lowest Prices
Best deals on genuine OE parts from dealerships
- Fast Delivery
Orders are processed and delivered promptly