Make sure this part fits

Mopar 4766058AB Spring Coil

2007-2010 Mopar 4766058AB

Customer Questions & Expert Answers (3)
4766058AB Mopar Spring Coil
  • Part Description
    Spring Front Coil
  • Position
    Front
  • Replaced By
    4766058AD
  • Manufacturer
    Mopar
Make sure this part fits
$63.23 MSRP: $93.75
You Save: $30.52 (33%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4766058AB
    Part DescriptionSpring Coil; Spring Front Coil
    Item Dimensions15.7 x 7.2 x 7.3 inches
    Item Weight5.60 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU4766058AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2010 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
    2007-2010 Dodge Avenger4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LExpress, Heat, R/T AWD, R/T FWD, SE, SXT
  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck?
    A:
    You can Select Your Vehicle to check if 4766058AB fits your vehicle.
    Posted and answered by Mopar Parts Specialist Reggie
    Q:
    How do you disassemble the strut and Coil Springs assembly for the 2008 Dodge Avenger? Posted by Verified Customer
    A:
    To disassemble the strut and spring assembly, you need to mount the strut clevis bracket portion in a vise and mark the components for reassembly. Then, install a spring compressor on the spring and compress it to relieve pressure from the upper mount. While holding the damper shaft, loosen the shaft nut with a socket. Remove the nut and upper mount, inspecting the pivot bearing and upper spring seat for damage. Lift the compressed spring from the assembly and remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft and check the lower spring isolator for damage. You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Reggie / Apr 19, 2024
    Q:
    What steps should be followed for replacing the Coil Springs on the 2007 Chrysler Sebring? Posted by Raine N.
    A:
    For coil spring models, raise the rear of the vehicle on jackstands and remove the wheels. Disconnect the stabilizer bar link from the lower control arm. Use a floor jack to support the knuckle and raise it slightly. Remove the lower control arm-to-knuckle bolt and nut. Lower the control arm slowly to remove the spring. Installation is the reverse of removal. You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Cristian / Oct 27, 2024

Genuine Mopar Part 4766058AB, the Right Choice

To ensure reliability, purchase Mopar part # 4766058AB Spring Coil. It is sometimes referred to as Coil Springs. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler Sebring models. It fits Dodge Avenger.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 4766058AB Spring Coil. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Dodge parts information, click here.
Shop MoparPartsGiant.com for dedicated service, prompt delivery, and low prices on genuine parts from real OE dealerships.