Mopar 52113266AA Rear Coil Spring

Put your vehicle on jackstands at the rear, put them under the frame rails for better support. Put a floor jack underneath the axle tube where you are working to hold up the weight of the rear axle. Keep the axle from going up, just support its weight. Take off the bottom wiener for the shock and disconnect the bar stabilizer links from each other's connection on the bar. Unfasten and take out the bolt holding the bellcrank to the differential cover in the rear. Lift up the jack to let down the rear axle and then take out the coil spring. Once you take everything out, you should put it back the correct way - and make sure every bolt gets tightened according to the recommended force.