Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Mopar 4882793 Universal Joint Kit

1994-2011 Mopar 4882793

Customer Questions & Expert Answers (5)
4882793 Mopar Universal Joint Kit Product Photo 1 of 1
4882793 Mopar Universal Joint Kit Product Photo 1 of 1
4882793 Mopar Universal Joint Kit Illustration 1 of 1
  • Part Description
    U-Joint Kit
  • Replaced By
    5015694AB
  • Manufacturer
    Mopar
Make sure this part fits
$67.50 MSRP: $100.00
You Save: $32.50 (33%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • 4882793 Universal Joint Kit is Ref No. 11 in the diagram below

    2005 Jeep Wrangler Universal Joint Kit Diagram for 4882793
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number4882793
    Part DescriptionU-Joint Kit
    Item Dimensions1.7 x 5.9 x 7.2 inches
    Item Weight1.50 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4882793
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2009 Chrysler Aspen8 Cyl 4.7L, 8 Cyl 5.7LLimited 4WD, Limited HEV 4WD
    2009-2010, 2001-2007, 1997-1999 Dodge Dakota6 Cyl 3.7L, 6 Cyl 3.9L, 8 Cyl 4.7L, 8 Cyl 5.2L, 8 Cyl 5.9LClub Cab 4WD, Laramie Club Cab 4WD, Laramie Crew Cab 4WD, Laramie Extended Cab 4WD, Laramie Quad Cab 4WD, Quad Cab 4WD, Regular Cab 4WD, SLT Club Cab 4WD, SLT Crew Cab 4WD, SLT Extended Cab 4WD, SLT Quad Cab 4WD, SLT Regular Cab 4WD, Sport Club Cab 4WD, Sport Crew Cab 4WD, Sport Quad Cab 4WD, Sport Regular Cab 4WD, ST Club Cab 4WD, ST Crew Cab 4WD, ST Extended Cab 4WD, ST Quad Cab 4WD, SXT Crew Cab 4WD, SXT Extended Cab 4WD, TRX Crew Cab 4WD, TRX Extended Cab 4WD
    2008-2009, 2002-2003, 1998-1999 Dodge Durango6 Cyl 3.9L, 8 Cyl 4.7L, 8 Cyl 5.2L, 8 Cyl 5.7L, 8 Cyl 5.9LAdventurer 4WD, Base 4WD, Limited 4WD, Limited HEV 4WD, R/T 4WD, SE 4WD, SLT 4WD, SLT Plus 4WD, Sport 4WD, SXT 4WD
    1994-2001 Jeep Cherokee4 Cyl 2.5L, 4 Cyl 2.5L Diesel, 6 Cyl 4.0L2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD, Classic 4 Door 2WD, Classic 4 Door 4WD, Limited 4 Door 2WD, Limited 4 Door 4WD, SE 2 Door 2WD, SE 2 Door 4WD, SE 4 Door 2WD, SE 4 Door 4WD, SE RHD 4 Door 2WD, SE RHD 4 Door 4WD, Sport 2 Door 2WD, Sport 2 Door 4WD, Sport 4 Door 2WD, Sport 4 Door 4WD
    1994-2004 Jeep Grand Cherokee6 Cyl 4.0L, 8 Cyl 4.7L, 8 Cyl 5.2L, 8 Cyl 5.9L2WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4WD, Laredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 4WD, Sport 4WD
    1997-2006 Jeep Wrangler4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 4.0LRubicon, Sahara, SE, Sport, Unlimited, Unlimited Rubicon, X
    2011 Ram Dakota6 Cyl 3.7L, 8 Cyl 4.7LLaramie Crew Cab 4WD, SLT Crew Cab 4WD, SLT Extended Cab 4WD, ST Crew Cab 4WD, ST Extended Cab 4WD, TRX Crew Cab 4WD

  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4882793 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    How to replace universal joints in a driveshaft on Dodge Durango? Posted by Customer
    A:
    A press or large vise will be required for this procedure. It may be advisable to take the driveshaft to a local dealer service department, service station, or machine shop where the universal joints can be replaced for you, normally at a reasonable charge. Remove the driveshaft. On U-joints with external snap-rings, use a small pair of pliers to remove the snap-rings from the spider. Supporting the driveshaft, place it in position on a workbench equipped with a vise. Place a piece of pipe or a large socket over one of the bearing caps and use the vise or press to force the bearing cap out. Use the vise or large pliers to work the bearing cap the rest of the way out. Transfer the sockets to the other side and press the opposite bearing cap out in the same manner. Pack the new universal joint bearings with grease. Position the spider in the yoke and partially install one bearing cap in the yoke. Start the spider into the bearing cap and then partially install the other cap. Align the spider and press the bearing caps into position, being careful not to damage the dust seals. Install the snap-rings. If difficulty is encountered in seating the snap-rings, strike the driveshaft yoke sharply with a hammer. This will spring the yoke ears slightly and allow the snap-rings to seat in the groove. Install the grease fitting and fill the joint with grease. Be careful not to overfill the joint, as this could blow out the grease seals. Install the driveshaft. Use the above procedure, but note that it will have to be repeated because the double-cardan joint is made up of two single-cardan joints. Also pay attention to how the spring, centering ball, and bearing are arranged. Both U-joints in the double-Cardan assembly must be replaced at the same time, even if only half of it is worn out.
    Posted by MoparPartsGiant Specialist
    Q:
    How can wear in the needle roller bearings and Universal Joint be identified for the 2010 Dodge Dakota? Posted by Customer
    A:
    Wear in the needle roller bearings can be identified by driveline vibration, noise during acceleration, and in extreme cases, metallic squeaking and disintegration of the bearings.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you use to force the bearing caps out of the yoke for the Universal Joint on the 1994 Jeep Cherokee? Posted by Customer
    A:
    A piece of pipe or a large socket with the same inside diameter.
    Posted by MoparPartsGiant Specialist
    Q:
    What materials are needed to press out the bearing caps for the Universal Joint in the 2006 Jeep Wrangler? Posted by Customer
    A:
    Place a piece of pipe or a large socket with the same inside diameter over one of the bearing caps, and position a socket of slightly smaller diameter on the opposite bearing cap.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 4882793, the Right Choice

To ensure reliability, purchase Mopar part # 4882793 Universal Joint Kit. It is sometimes referred to as Universal Joint. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler Aspen models. It fits Dodge Dakota, Durango. It also fits Jeep Cherokee, Grand Cherokee, and Wrangler. This also fits Ram Dakota.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 4882793 Universal Joint Kit. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly