How to remove and install the front crankshaft seal in 2.7L V6 engine on 2016 Dodge Challenger?

The crankshaft pulley bolt has to be loosened and the pulley can then be slid off the engine. Gradually remove the seal from the cover using a seal removing tool or a large screwdriver being keen not to scratch the seal bore or the cranks shaft. It is also prohibited to scratch or gouge the area of the sealing component or to distort it in any way since that would lead to an oil leak. Remove the debris of the old seal and corrosion from the bore before placing the new seal in the bore with the inward facing side being on the side that has the spring. A small quantity of oil can be put at the outer ring of the new seal for easy fitting but should not be excessive. Screw the seal into the bore using a seal driver or a large socket and hammer to the extent that the selected socket diameter is equal to the outside diameter of the seal and the new seal is pressed into the cover flange. Grease the seal lips with the engine oil and replace the crankshaft pulley. The other steps of installation are the reverse of those of removal. After the installation has been done the engine should be turned on to see if there is any sign of oil leakage.

Genuine 2016 Dodge Challenger Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
2016 Dodge Challenger Crankshaft Rear Oil Seal Retainer
Part Number: 53021335AE
$99.00 MSRP: $147.00
You Save: $48.00 (33%)
ADD TO CART
Product Specifications
- Other Name: RETAINER Crankshaft Rear Oil Seal Not Included With Long Block Engine Install Kit; Rear Main Seal, Rear Main Seal Retainer
- Position: Rear
- Replaces: 68060342AA, 53021335AD, 53021335AC, 5140028AA, 53021335BA, 53021338AB, 68017721AA
- Item Weight: 3.00 Pounds
- Item Dimensions: 1.3 x 10.6 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021335AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2016 Dodge Challenger Submodels:
- R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT Plus | 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
2016 Dodge Challenger Crankshaft Oil Seal
Part Number: 68079589AA
$19.81 MSRP: $28.35
You Save: $8.54 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Replaces: 5184541AB
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68079589AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2016 Dodge Challenger Submodels:
- GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SE, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6L
View related parts
2016 Dodge Challenger Crankshaft Oil Seal
Part Number: 53021585AD
$27.96 MSRP: $40.00
You Save: $12.04 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Replaces: 53021585AB
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.1 x 3.2 x 3.3 inches
- Condition: New
- SKU: 53021585AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2016 Dodge Challenger Submodels:
- R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT, SRT 392, SRT 392 RWD, SRT Core, SRT Demon RWD, SRT Hellcat, SRT Hellcat RWD, SRT8, SRT8 Core, SXT, SXT Plus | 8 Cyl 5.7L, 8 Cyl 6.1L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
2016 Dodge Challenger Cover-CRANKSHAFT Rear Oil
Part Number: 68223854AA
$99.00 MSRP: $147.00
You Save: $48.00 (33%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil; Rear Main Seal Retainer
- Replaces: 68078786AA, 5184285AG, 68152024AA
- Item Weight: 1.60 Pounds
- Item Dimensions: 4.6 x 8.2 x 10.9 inches
- Condition: New
- SKU: 68223854AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2016 Dodge Challenger Submodels:
- GT AWD, GT RWD, R/T, R/T 392 RWD, R/T RWD, R/T Scat Pack, R/T Scat Pack RWD, SRT 392, SRT 392 RWD, SRT Hellcat RWD, SXT, SXT AWD, SXT Plus, SXT RWD | 6 Cyl 3.6L

2016 Dodge Challenger Crankshaft Seal

On our website, we proudly offer genuine 2016 Dodge Challenger Crankshaft Seal at the market's great competitive prices. We are confident that choosing brand new OEM 2016 Dodge Challenger Crankshaft Seal from our site will save you both trouble and money.

2016 Dodge Challenger Crankshaft Seal Parts Questions & Experts Answers

Q: How to remove and install the front crankshaft seal in 2.7L V6 engine on 2016 Dodge Challenger?
A: The crankshaft pulley bolt has to be loosened and the pulley can then be slid off the engine. Gradually remove the seal from the cover using a seal removing tool or a large screwdriver being keen not to scratch the seal bore or the cranks shaft. It is also prohibited to scratch or gouge the area of the sealing component or to distort it in any way since that would lead to an oil leak. Remove the debris of the old seal and corrosion from the bore before placing the new seal in the bore with the inward facing side being on the side that has the spring. A small quantity of oil can be put at the outer ring of the new seal for easy fitting but should not be excessive. Screw the seal into the bore using a seal driver or a large socket and hammer to the extent that the selected socket diameter is equal to the outside diameter of the seal and the new seal is pressed into the cover flange. Grease the seal lips with the engine oil and replace the crankshaft pulley. The other steps of installation are the reverse of those of removal. After the installation has been done the engine should be turned on to see if there is any sign of oil leakage.