My Garage
My Account
Cart
Genuine Dodge Avenger Fuel Pump
Gas Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Fuel Pumps found
Dodge Avenger Fuel Pump Module Assembly
Part Number: 68033083AB$325.58 MSRP: $490.00You Save: $164.42 (34%)
Dodge Avenger Fuel Pump Module/Level Unit
Part Number: 68004475AB$330.50 MSRP: $489.00You Save: $158.50 (33%)
Dodge Avenger Fuel Pump Module Assembly-And Level Sensor Module
Part Number: 68004936AC$419.10 MSRP: $640.00You Save: $220.90 (35%)
Dodge Avenger Fuel Pump
The Fuel Pump in Dodge Avenger cars is applied for the fuel delivery process starting from the tank and culminating in the combustion chamber. It functions by delivering fuel to either the carburetor or fuel injection system, based on the kind of engine. Electric fuel pumps are used in Dodge Avenger models for the fuel injection system with most of them are located within the fuel tank while carburetor models mostly use mechanical fuel pumps located outside the car. Years of Dodge Avenger manufacture have witnessed changes in theFuel Pump Technology whereby the traditional mechanical pumps were replaced with the modern electric pumps. The electric pumps work with greater pressure and have better cooling properties as compared to mechanical pumps which work only up to a certain pressure. The latest technology in the fuel pump Dodge Avenger is the electric fuel pump with better and improved performance and safety and with electronic control units for the management of fuel.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Fuel Pump at great affordable prices. Moreover, all genuine Dodge Avenger Fuel Pump come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Avenger Fuel Pump Parts Questions & Experts Answers
- Q: How to Remove and Install a Fuel Level Sensor, Fuel Pressure Regulator, and Fuel Pump Assembly on a Dodge Avenger?A:AWD configurations of 2014 and former models contain a saddle fuel tank that uses main and auxiliary fuel pumps along with their dedicated sending units. First step should be to release pressure from the fuel system. Move on to disconnect the negative battery cable from its mounting location on the remote ground terminal or battery. First remove the rear seat cushion followed by the removal of fuel pump module cover while extra attention needs to be focused on main and auxiliary fuel pump module covers during removal on AWD models. The repair procedure begins by disconnecting the fuel delivery line quick-connect fitting from all components comprising the fuel pump and fuel pressure regulator and Fuel Level Sensor. This step concludes with disconnecting the assembly electrical connector. The assembly requires alignment marks between itself and the fuel tank prior to extraction for proper future installation. Adjustable-joint pliers help you loosen the lock ring fixing the assembly before you lift it from the fuel tank while steering it in a position which prevents the float arm from bending and protects the fuel pump inlet strainer from damage. Raising the fuel pump module and disconnecting the internal fuel line becomes necessary during auxiliary pump removal in AWD models. The removal period allows opportunity for an inspection of the pump inlet strainer and its subsequent cleaning with solvent until replacement becomes necessary. Reinstall the fuel pump module according to its removal steps while keeping the marks correctly aligned before locking it tightly with the ring.
