How to remove the Fuel Injector and Fuel Rail on Dodge Avenger?

To relieve the fuel system pressure, disconnect the negative battery cable. If working on a V6 engine, remove the upper intake manifold or the air intake tube/resonator for a 2015 and later 2.4L engine. Disconnect the fuel delivery line quick-connect fitting and the fuel delivery line from the fuel rail. Disconnect the fuel injector electrical connectors and detach the injector wiring harness mounting clips from the fuel rail. Remove the fuel rail mounting bolts and carefully pull up on the fuel rail to remove it along with the injectors. Remove the O-rings from each injector and replace them with new ones coated in clean engine oil. Ensure the injector is properly seated in the mounting pipe. Reinstall the fuel rail and injectors, tightening the retaining bolts to the specified torque. Start the engine and check for leaks at the quick-connect fitting and the upper end of each injector.

Genuine Dodge Avenger Fuel Rail

Engine Fuel Rail

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Rails found

View related parts
Dodge Avenger Fuel Rail
Part Number: 53034198AC
$476.58 MSRP: $646.00
You Save: $169.42 (27%)
ADD TO CART
Product Specifications
- Other Name: Rail Fuel; Fuel Rail
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, LUX, Mainstreet, R/T FWD, SE, SXT, SXT Plus | 6 Cyl 3.6L
View related parts
Dodge Avenger Fuel Rail
Part Number: 4627355AA
$67.95 MSRP: $101.00
You Save: $33.05 (33%)
ADD TO CART
Product Specifications
- Other Name: Rail Fuel; Fuel Rail
- Replaces: 4891575AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT | 4 Cyl 2.4L
View related parts
Dodge Avenger Fuel
Part Number: 4891575AA
$67.95 MSRP: $101.00
You Save: $33.05 (33%)
ADD TO CART
Product Specifications
- Other Name: Rail Fuel
- Replaced by: 4627355AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT | 4 Cyl 2.4L
View related parts
Dodge Avenger Fuel Rail
Part Number: 4591988AA
Product Specifications
- Other Name: Rail Fuel; Fuel Rail
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Avenger | Express, Heat, R/T FWD, SXT | 6 Cyl 2.7L
- 2007-2008 Dodge Avenger | SE, SXT | 6 Cyl 2.7L
View related parts
Dodge Avenger Fuel Rail
Part Number: 4861584AB
Product Specifications
- Other Name: Rail Fuel; Fuel Rail
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T AWD, R/T FWD, SE, SXT | 6 Cyl 3.5L
View related parts
Dodge Avenger Rail
Part Number: 4669381
Product Specifications
- Other Name: Rail, Fuel; Fuel Rail
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Dodge Avenger | Base, ES | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Dodge Avenger Fuel Rail
Part Number: 68001311AA
Product Specifications
- Other Name: Rail Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, Heat, R/T FWD, SE, SXT

Dodge Avenger Fuel Rail

The Dodge Avenger Fuel Rail sends pressurized gas to each injector to ensure the engine gets the right mix for efficient power and clean running. The early Dodge Avenger models were fitted with throttle body injection with an unusual compact Fuel Rail. The Fuel Rail was located above the throttle plates and fed one or two injectors. This was a compromise between carburation and electronic management. With the Dodge variety switching over to multiport systems, a tubular Fuel Rail fed individual port injectors running along the intake runners, which allowed the computer to shorten or lengthen pulse width for every cylinder, boosting mileage. The new Avenger versions with gasoline direct injection have a stouter high pressure Fuel Rail operating at thousands of psi. It sprays finer droplets directly into the chambers for enhanced performance with lower exhaust gases. Each Dodge Avenger Fuel Rail incorporated into the update will maintain a regulated pressure from the electric pump for reliable starts and quick throttle response with less fuel waste.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Fuel Rail at great affordable prices. Moreover, all genuine Dodge Avenger Fuel Rail come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Avenger Fuel Rail Parts Questions & Experts Answers

Fuel Rail
53034198AC
Q: How to remove the Fuel Injector and Fuel Rail on Dodge Avenger?
A:
To relieve the fuel system pressure, disconnect the negative battery cable. If working on a V6 engine, remove the upper intake manifold or the air intake tube/resonator for a 2015 and later 2.4L engine. Disconnect the fuel delivery line quick-connect fitting and the fuel delivery line from the fuel rail. Disconnect the fuel injector electrical connectors and detach the injector wiring harness mounting clips from the fuel rail. Remove the fuel rail mounting bolts and carefully pull up on the fuel rail to remove it along with the injectors. Remove the O-rings from each injector and replace them with new ones coated in clean engine oil. Ensure the injector is properly seated in the mounting pipe. Reinstall the fuel rail and injectors, tightening the retaining bolts to the specified torque. Start the engine and check for leaks at the quick-connect fitting and the upper end of each injector.