Q: How to Remove and Install a Shock Absorber/Coil Spring Assembly on a Dodge Durango?
A: To remove the shock absorber, loosen the front wheel lug nuts and remove the fasteners attaching the shock absorber to the frame and lower Control Arm. Also, inspect the shock absorber, coil spring, and spring seats for any damage or wear. Installation is the reverse steps of removal, ensuring the fasteners are tightened to the specified torque. Finally, tighten the wheel lug nuts to the torque.
Q: How Do You Replace Shock Absorbers on a Dodge Durango?
A: To replace the shock absorber, raise the rear of the vehicle and support it securely on jack stands placed under the frame rails. Support the rear axle with a floor jack placed under the axle tube on the side being worked on. Remove the nut and bolt that attach the upper end of the shock absorber to the frame, using penetrating oil. The installation is the reverse of removal.