My Garage
My Account
Cart
Genuine Dodge Neon Hood Cable
Hood Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Hood Cables found
Dodge Neon Hood Cable
The Dodge Neon Hood Cable lets drivers pop the hood with a simple pull of the in cabin release handle, linking that lever to the twin latch system that keeps the panel secure. A primary Hood Cable runs from the dashboard lever to a junction beneath the hood, where secondary Hood Cable lines split to each latch and tug them open together for smooth engine access. On newer Dodge Neon versions materials improved to resist moisture yet the same vulnerabilities remain, because cracks still let water in and stretch the inner wire. Over years of exposure, the steel core and sheath of each Hood Cable can deteriorate, weaken pull force, and leave the hood stuck. Early Neon models applied the same basic two stage layout found in later Dodge editions, so the main difference lies in cable count rather than concept, with one long leader cable and two shorter latch cables working as a coordinated set. Keeping every Hood Cable intact ensures the familiar quick tug keeps providing entry for routine checks on any Dodge Neon.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Neon Hood Cable at great affordable prices. Moreover, all genuine Dodge Neon Hood Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Neon Hood Cable Parts Questions & Experts Answers
- Q: How do you replace the hood release cable and Hood Latch on Dodge Neon?A:Open the Hood and support it on the prop rod. Remove the radiator Grille. Detach the latch assembly by removing the nuts, then disconnect the release cable from the hood latch. In the passenger compartment, remove the left front kick panel and the bolts securing the hood release handle, moving the handle away from the cowl panel. Under the dash, take out the cable grommet from the firewall. Connect a piece of heavy string or flexible wire to the engine compartment end of the cable, then pull the release cable and wire through the firewall into the passenger compartment, disconnecting the string or wire from the old cable. Attach the string or wire to the new cable and pull it through the firewall into the engine compartment. The remainder of the installation is the reverse of removal, ensuring the grommet seats properly in the firewall.
