My Garage
My Account
Cart
Genuine Dodge Nitro Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Brake Lines found
Dodge Nitro Brake Line
The Brake Line in Dodge Nitro integrates with the brake system to assist in the provision of brake fluids from the master cylinder to the brake caliper pistons for hydrauli This system is essential for guaranteeing that, when piston is depressed the car would have the ability to stop or reduce speed as desired. The Brake Lines used by Dodge Nitro models may include metal brake lines which easily rust and are vulnerable to wore and rubber brake hoses that may show cracking signs on the outer layer or may have internal problem. The performance is further improved when one opts to upgrade to the braided stainless steel Brake Lines which really transforms the feel and sensitivity of the pedal especially when ever on the hard mode of driving. There are also pre-bend brake line kits for easier fitting and all of them are made of material that is not easily corroded.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Nitro Brake Line at great affordable prices. Moreover, all genuine Dodge Nitro Brake Line come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Nitro Brake Line Parts Questions & Experts Answers
- Q: How to inspect and replace brake hoses and Brake Line on Dodge Nitro?A:About every six months, inspect the flexible hoses that connect the steel brake lines with the front and rear brake assemblies for cracks, chafing, leaks, blisters, and other damage. Use a light and mirror for a thorough check. If any hose exhibits these conditions, replace it with a new one. For 2007 and earlier Liberty models, to replace the front brake hose, disconnect the brake line from the hose fitting in the engine compartment, raise the front of the vehicle, remove the banjo bolt from the Brake Caliper, remove the bolt that attaches the hose to the vehicle, and install the new hose by attaching it to the caliper and connecting the brake line. For the rear brake hose, raise the vehicle, disconnect the steel brake line from the hose, unbolt the hose bracket from the body, disconnect the vent tube from the hose end, disconnect the steel brake lines from the hose end, unbolt the hose from the rear axle housing, and install the new hose by connecting the steel brake lines and securing it to the rear axle housing. When replacing metal brake lines, use the correct parts and ensure they are securely supported and have clearance. After installation, check the master cylinder fluid level, bleed the system, and test the brakes before driving. For 2008 and later Liberty models and all Nitro models, to replace the left front brake hose/line, disconnect the left front brake line from the ABS Hydraulic Control Unit, raise the front of the vehicle, detach the ABS wheel speed sensor harness from the brake hose, unscrew the brake hose banjo bolt, and guide the brake line/hose out from the fender well. Repeat similar steps for the right front brake hose/line, left rear brake hose/line, and right rear brake hose/line. Bleed the hydraulic system after installation.
Related Dodge Nitro Parts
Dodge Nitro ABS Control Module
Dodge Nitro Parking Brake Cable
Dodge Nitro Speed Sensor
Dodge Nitro Brake Pad
Dodge Nitro Brake Master Cylinder
Dodge Nitro Brake Disc
Dodge Nitro Brake Bleeder Screw
Dodge Nitro Brake Caliper Bracket
Dodge Nitro Brake Fluid Level Sensor
Dodge Nitro Parking Brake Shoe